Protective and Decorative Vacuum’s Coatings on Wares of Artistic Castings

Abstract

The problem of environmental protection is extraordinarily important, and its actuality will increase with every year. In this aspect, processes of depositing of coatings in vacuum have got serious advantages before wide-spread galvanic method, as the last requires building of the special cleansing building, which cost in general balance of covering’s process can arrive till 60 %. It should be noted that preliminary preparation of surface which, as is generally known, has the important value at the method of metallization in vacuum often execute by the smoldering discharge (by the «dry method»).

Authors and Affiliations

V. GRECHANYUK, I. GRECHANYUK, N. GRECHANYUK

Keywords

Related Articles

Corrosion Behaviour and Biocompatibility of 316 Stainless Steel as Biomaterial in Physiological Environment

Although stainless steel is a material widely used for biomedical applications, its surface properties for long term application are still a serious concern. 316L stainless steel (SS 316L) is a material commonly used in...

Research on the Complex Microalloyed Zinc Melts

Microalloyed zinc melts are used in hot dip galvanized processes in order to improve products quality. Experiments aimed at obtaining zinc coatings with increased resistance to corrosion, which adhere very well to steel...

Research on the Operation of Commercial Vessels with Compressed Air

Regarding the reduction of the carbon dioxide emissions in the atmosphere, this paper is going to present a system of propulsion with compressed air used for medium-sized commercial vessels. In the transport domain, Roma...

Study of Tribocorrosion Processes by Electrochemical Techniques

Tribocorrosion is defined as the chemical-electrochemical-mechanical process leading to a degradation of materials in sliding, rolling or erosion contacts immersed in a corrosive environment. That degradation results fro...

Experimental Research Regarding the Evolution of Some Parameters of the Superficial Layer in Low Cycle Fatigue Process

The development of some mechanic engineering systems in, feasible to pressure vessels, aeronautics, ship building technology, requires a full investigation of the material features that are to be examined under a low cyc...

Download PDF file
  • EP ID EP663326
  • DOI -
  • Views 66
  • Downloads 0

How To Cite

V. GRECHANYUK, I. GRECHANYUK, N. GRECHANYUK (2006). Protective and Decorative Vacuum’s Coatings on Wares of Artistic Castings. Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor, 29(2), 35-39. https://europub.co.uk/articles/-A-663326