The Influence of Friction Forces in Metal Powders Compaction Process of Stainless Steel 316L
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 2
Abstract
The purpose of this study is to determine as precisely the influence of friction in the compaction of powders, and "conversion" of it, increasing densification. The process is intended to be used in the compaction of hard deformable materials, which increased to approximately 90% densification required very high compaction pressures. These pressures are high, significant wear of the tools produce the compaction and thereby increasing production costs of finished parts from metal powders.
Authors and Affiliations
Monica SAS-BOCA, Luciana RUS, Marius TINTELECAN, Ionuţ MARIAN, Liviu NISTOR
Keywords
Related Articles
- EP ID EP627883
- DOI -
- Views 63
- Downloads 0
Kinetics and Thermodynamic Transformation of a Special S.G. Cast Iron
The paper contains a study about the kinetics and thermodynamics transformation of a S.G. Cast Iron during the isothermal heat treatment. With the help of Johnson-Mehl and Arrhenius equations, there were described the ac...
Experimental Shooting with Thor-1 Disruptor: New Type of Gas Device Used to Neutralize Improvised Explosive Devices
The paper presents experiments conducted with disruptor THOR-1, a new type of gas-dynamic device used to neutralize improvised explosive devices. Disruptor THOR-1 [1] was designed and practically built as a gas-dynamic d...
The Different Practical Application of Niobium Carbide Coatings Elaborated by CVD Process
In this paper, the different application of niobium carbide coatings onto hard carbide substrate was investigated using scanning electron microscope (SEM), Xray diffractometer (XRD) and micro-hardness. The paper conducte...
Use of Alternative Fuels in Road Transport and its Environmental Effects. A Literature Review
This paper presents a literature review on use of alternative fuels in road transport, in respect of their performance and emission in diesel engines/vehicles. The major limitations of vegetable oils as fuel in diesel en...
Quality Assurance of Cylindrical Casted Parts with Small Thickness
The casting of the cylindrical parts with great diameter and small thickness and intermediary flange is difficult because of the great values of the forced contraction. Thus the value of the tensile stress is very great...