Experimental Study of Frictional Vibrations Under Dry Friction Conditions
Journal Title: Tribology in Industry - Year 2018, Vol 40, Issue 3
Abstract
The paper discusses issues related to dynamic characteristics of friction. Vibrations are analyzed on “indenter on disk” system using brass and steel samples as an example. “Indenter on disk” system is changed by addition of supplementary degree of freedom, which allows the tangential component of friction to be analyzed. Vibration recording, processing and interpretation technique, which takes into account interaction speed, is specified. The obtained results can be used in control systems of modern mechanisms with allowances made for vibration and alternating impacts. Emerging vibrations were found to occupy a significant spectral range and have visible borders across the entire duration of implementation. The spectrographic presentation method was applied for visualization.
Authors and Affiliations
G. M. Ismailov, A. E. Tyurin
Keywords
Related Articles
- EP ID EP407254
- DOI 10.24874/ti.2018.40.03.05
- Views 60
- Downloads 0
Experts System Based on the Neural Network and Mobile Database in the Field Galvanic Metal Coating
In a modern era of information technologies, everyday changes are more numerous and various. One of those changes is related to the greater use of mobile devices in a decision making processes. They may be used in the fi...
Wear Response of Aluminium 6061 Composite Reinforced with Red Mud at Elevated Temperature
The present work is focused on the investigations on dry sliding wear behaviour of aluminium metal matrix composite at room and elevated temperature. Aluminium metal matrix composites reinforced with red mud are prepared...
Effects of Velocity-Slip and Viscosity Variation in Squeeze Film Lubrication of Two Circular Plates
A generalized form of Reynolds equation for two symmetrical surfaces is taken by considering velocity-slip at the bearing surfaces. This equation is applied to study the effects of velocity-slip and viscosity variation f...
Corrosion Behavior of Compocasted ZA27/SiCp Composites in Sodium Chloride Solution
The corrosion behavior of particulate ZA27/SiCp composites in an aerated sodium chloride solution was studied. The composites were synthesized via compocasting with addition of 1, 3 and 5 wt.% SiC particles in the matrix...
Tribological Properties of WC-Co/NiCrBSi and Mo/NiCrBSi Plasma Spray Coatings under Boundary Lubrication Conditions
The tungsten carbide based WC-Co/NiCrBSi (50/50) and molybdenum based Mo/NiCrBSi (75/25) coatings were investigated under boundary lubricated sliding conditions, and their tribological properties were analysed and compar...