EXPERIMENTAL STUDY OF POLYMER MELTING PROCESS
Journal Title: Вчені записки Таврійського національного університету імені В. І. Вернадського. Серія: Технічні науки - Year 2018, Vol 29, Issue 3
Abstract
On the basis of a cone-plane type viscometer, an installation for studying the melting process of granular thermoplastics has been developed. A technique for carrying out experimental studies is proposed. Change dynamics in the fraction of the solid phase in a mixture of granular thermoplastics with a meltis studied experimentally. The dependence of the mixture viscosity of polymer solid particles in the melt on their concentration was studied. It is established that for various polymers under certain temperature-deformation regimes, the maximum effective viscosity of solid particles with a melt is observed.
Authors and Affiliations
І. І. Івіцький, О. Л. Сокольський
THE STUDY OF FLEXIBLE ELEMENTS OF CONCRETE ON MULTICOMPONENT BINDER UNDER THE ACTION OF SHORT-TERM LOAD
The study of the technical and economic feasibility of using expanded clay, quartz sand and multicomponent binder for concrete and reinforced concrete is an important national economic task. On the basis of the conducted...
NEW INFORMATION TECHNOLOGIES FOR ARXIV DATA SEARCH, PROCESSING AND ANALYSIS
Paper is dedicated to representing of new technologies for arXiv data search, processing and analysis. By presenting data of archive as a model “Concept – System of research fields” there was developed and realized the a...
INFLUENCE OF NON-RIGID ROAD COATING COVERING SMOOTHNESS ON THE PARAMETERS OF THE TRAFFIC FLOW
This article considers the smoothness influence of non-rigid road coating coverings on the parameters of the traffic flow. The scheme of interaction of a moving pneumatic car wheel and unevenness on a road covering is co...
RESERCH AND EVALUATION OF REAGENT EFFICIENCY FOR STABILIZING WATER TREATMENT
The problem of stabilizing treatment of water for cooling systems in the energy industry and is very relevant. With increasing water quality will reduce the volume of water discharged during purging systems. And this, in...
PROTECTION OF ASYNCHRONOUS MOTOR WHICH CONTROLLED BY THYRISTOR STATION
In the article for the first time, it is proposed to use the structural scheme of the universal panel for protection of asynchronous motors with the power up to 400 kW. The panel allows blocking the range of a number of...