Experimental Study To Assess The Effect Of Electrode Material While Machining Inconel 718 Through Edm Process
Journal Title: Journal of Advanced Research in Manufacturing, Material Science & Metallurgical Engineering - Year 2017, Vol 4, Issue 3
Abstract
Electrical discharge machining process is extensively used in tool and die making industry for processing of hardened materials with reasonable precision [1]. In the present work, comparison of MRR has been done using brass and copper electrodes for machining INCONEL 718. Factors such as Pulse ON time, Pulse OFF time, Discharge current and voltage were considered as the input parameters, while the MRR is considered as the output for both brass and copper electrodes. It was found that the MRR was higher when copper electrode was used instead of brass electrode while performing drilling operation.
Authors and Affiliations
Kulwinder, Singh
Keywords
Related Articles
- EP ID EP274049
- DOI -
- Views 122
- Downloads 0
Nanomaterials based Electrodes for Electrochemical Sensor
Carbon nanoparticles and Zinc oxide material is a unique material for marking electrode for electrochemical sensing of heavy metal ions in the water. Carbon has unique properties. We proposed simple method for preparatio...
Mineral Processing Route and Safety in Plant Operations
Sampling and Chemical characterisation of head sample are very important stage prior to choosing mineral processing route. Particle size analysis, Mineralogical assessment is another determinant for the liberation size o...
A Review on Fabrication Methods of Porous Titanium Dental Implant
Titanium has got excellent mechanical and biological properties. Itis nearly inert biologically as due to its biocompatibility. But titanium and its alloys have a high Young’s modulus compared to the bone. To improve oss...
Analysis of W-Al2 O3 Nanostructured Thin Film Coatings Using DOE Approach
This investigation studies the influence of process parameters of magnetic sputtering method in codeposition of Tungsten (W) and Alumina (Al2 O3 ) thin film on stainless steel 304 grade and copper substrates. The develop...
Manufacturing of Low Cost Semi Automatic Camera Slider
This papers deals with the efficient design of a camera slider. A camera crane is useful for getting high shots or low shots which need to move a great distance horizontally or vertically, without the expense and safety...