EXPERIMENTS ON THE DEPHOSPHORIZATLON OF HIGHLY ALLIED MANGANESE STEEL WITH HIGH PHOSPHORUS
Journal Title: Applied Engineering Letters - Year 2017, Vol 2, Issue 3
Abstract
The practical application of dephosphorization is discussed in the paper. Using the method of austenitic manganese steel waste re-melting, we get inevitable, phosphorus contents that exceed the admissible limits. The phosphorus increases the hardness and tensile strength of steel and it seriously affects the ductility and resistance to shock or impact. Experiments on the dephosphorization of highly allied manganese steel containing high phosphorous was made in laboratory conditions and the experimental results showed that the content of phosphorous in the steel can be lowered quickly and considerably. The industrial conditions allowed us to obtain similar results with those obtained in the laboratory. The only difference between the two experiments is the dephosphorization level, which was higher in the laboratory compared to the level obtain on an industrial scale, even if the experiments were done in similar conditions.
Authors and Affiliations
Imre Kiss, Vasile Alexa, Sorin Ratiu
Keywords
Related Articles
- EP ID EP238823
- DOI -
- Views 82
- Downloads 0
COMPARISON OF HEAT EXCHANGERS ACCORDING TO THE SHAPE OF RIBS
In this paper the lamella heat exchangers were presented. They are used for water and air as operating mediums, and can be differentiated by the shape of the ribs. The one has sinuous type of ribs, while the other one ...
EFFECT OF ALUMINA AND GRAPHENE ON MECHANICAL AND TRIBOLOGICAL BEHAVIOUR OF Al‐7075 HYBRID COMPOSITE
In this paper the combined effect of alumina and graphene reinforced with aluminum matrix by using stir casting methodology, was evaluated. Hybrid metal matrix composites gives combined results effect of different reinfo...
DRYING KINETICS AND MATHEMATICAL MODELING OF FAR-INFRA RED VACUUM DRYING OF SOME VEGETABLES AND FRUITS
In this paper the drying kinetics of far-infrared vacuum drying of some vegetables and fruits are presented. The experimental data of drying kinetics were obtained on experimental drying setup designed to imitate industr...
THE STRUCTURAL SOLUTIONS OF THE TIMBER ROOFS: JOINTS AND JOINING PLATES
In the article the authors present the practical design solutions regarding to structural timber roofs, especially the carpentry joints. The selected factors and parameters which should be respected during the correct st...
A SIMPLE APPROACH FOR DESIGNING A FILTER ON MICROSTRIP LINES
This paper deals with the design and fabrication of edge-coupled band pass filter (BPF) circuit (fifth order) on microwave laminate for 4.5 GHz ± 0.5 GHz application. The design of filter is realized on a high quality RT...