Fabrication of new carbon paste electrodes based on gold nano-particles self-assembled to mercapto compounds as suitable ionophores for potentiometric determination of Copper ions
Journal Title: Iranian Chemical Communication - Year 2014, Vol 2, Issue 2
Abstract
In the present study, we investigate the potentiometric behavior of Cu2+ carbon paste electrodes based on two mercapto compounds 2-Ethylmino-5-Mercapto-1,3,4-Thiadiazole (EAMT) and 2-Acetylamino-5-mercapto-1,3,4-thiadiazole (AAMT) self-assembled on gold nano-paricle (GNP) as ionophore. Then, the results obtained from the modified electrodes are compared. The self-assembled ionophores exhibit a high selectivity for Copper ion (Cu2+), in which the sulfur and nitrogen atoms in their structure play a role as the effective coordination donor site for the Copper ion. Among these electrodes, the best performance was obtained with the sensor with a EAMT/graphite powder/paraffin oil weight ratio of 4.0/68/28 with 200 µL of GNP exhibits the working concentration range of 1.6×10−9 to 6.3×10−2 M and a Nernstian slope of 28.9±0.4 mVdecade−1 of copper (II) activity. The detection limit of electrode was 8.9(±0.2)×10−10 M and potential response was pH independent across the range of 2.8–6.3. The proposed electrode presented very good selectivity and sensitivity towards the Cu2+ ions over a wide variety of cations including alkali, alkaline earth, transition and heavy metal ions. Also the proposed electrode was successfully applied as an indicator electrode in the potentiometric titration of Cu (II) ions with EDTA and the potentiometric determination of copper ions in spiked water samples.
Authors and Affiliations
Rasoul Pourtaghavi Talemi, Sajjad Bakhtiari, Nabi Javadi, Morteza Vatanparast
Sliding Wear Behaviour of Walnut Shell Powder Filled Vinyl Ester/ WSP Green Composites
Polyvinyl ester green composites were synthesized with walnut shell powder (WSP) by in-situ polymerization technique. The green composites have been evaluated for mechanical properties such as tensile strength, tensile m...
Synthesis, spectroscopic investigation and coductometry of a new hexadentate symmetric Schiff base ligand containing N2O2S2 donor atoms and related complexes with Cd(II), Zn(II), Co(II) and Mn (II) metal ions
In this paper, we report the synthesis and characterization of a new symmetric macroacyclic Schiff base ligand (H2L) and related complexes with different metals. (H2L) was synthesized by the one pot condensation reaction...
MgCaFe-layered double hydroxide (LDH) for congo red dye removal in aqueous solution
In this work, the ability of the MgCaFe- Layered double hydroxide (LDH) for congo red (CR) dye removal in aqueous solution was investigated. Various parameters such as initial dye concentrations, temperature, adsorbent d...
Ammonium nitrate as an efficient and green reagent for the oxidation of alcohols into their corresponding carbonyl compounds in the presence of heteropoly acids
Simple, cheap and green protocol for effective conversion of alcohols to corresponding carbonyl compounds in the presence of H14[NaP5W30O110] and ammonium nitrate is reported. The products were characterized by FT-IR and...
Determination of trace amounts of chromium ions in water and food samples using ligand-less solid phase extraction-based modified nano-boehmite(AlOOH)
Chromium is one of the hazardous pollutants in industrial effluents. In this study, a new nano-boehmite modified with sodium dodecyl sulphate is developed for preconcentration trace amounts of chromium ions as a prior ste...