FACE GEAR WITH AN INVOLUTE TEETH LINE IN APPLICATIONS FOR CLUTCH CONNECTIONS
Journal Title: Archives of Mechanical Technology and Materials - Year 2015, Vol 35, Issue
Abstract
The paper presents methods of forming a face gear with an involute teeth line in application for clutch connections. The method is based on application of a disc tool instead of application of a hob. The solution is possible after application of the CNC milling machine with five axis numeric system control. The method of forming a face gear proposed in this article is based on application of the disc tool with a single blade edge and CNC milling machine with a special program. The special program is used for control technology of cutting face gear. The algorithm and geometrical model for calculation of a modification of an involute teeth line of a face gear have been shown in the paper.
Authors and Affiliations
Piotr Frąckowiak, Stanisław Andrzej Kończak
Keywords
Related Articles
- EP ID EP198812
- DOI -
- Views 71
- Downloads 0
Identifying Combination of Friction Stir Welding Parameters to Maximize Strength of Lap Joints of AA2014-T6 Aluminum Alloy
AA2014 aluminum alloy (Al-Cu alloy) has been widely utilized in fabrication of lightweight structures like aircraft structures, demanding high strength to weight ratio and good corrosion resistance. The fusion welding of...
THE QUALITY MODEL OF THE AWJ CUTTING PROCESS FOR ALUMINUM TYPE PA4 ALLOY
The article presents the quality model of the process of high-pressure abrasive waterjet cutting of aluminum alloy, type PA4, as well as the results of research that verified the accuracy of the determined dependence. Th...
Design of The Test Stand for Hydraulic Active Heave Compensation System
The article presented here described the design of a test stand for hydraulic active heave compensation system. The simulation of sea waves is realized by the use of hydraulic cylinder. A hydraulic motor is used for sea...
The influence of laser re-melting on microstructure and hardness of gas-nitrided steel
In this paper, modification of nitrided layer by laser re-melting was presented. The nitriding process has many advantageous properties. Controlled gas nitriding was carried out on 42CrMo4 steel. As a consequence of this...
Influence of Water on Tribological Properties of Wood-Polymer Composites
Utilization of ecological materials for appliances and products is one of the ways to achieve the goal of sustainability.Wood-polymer composites as a cheap, lightweight, durable and esthetic material has gained attention...