Features of occurrence and development contact destructions of rail heads
Journal Title: Інформаційно-керуючі системи на залізничному транспорті - Year 2017, Vol 22, Issue 5
Abstract
Principal reasons of destruction of rail heads are considered in the article. Clarified, in the result of exploitation on the surface of rolling of rails there invoke longitudinal cracks, that weaken connection of superficial ball with rest volume of head's metal. This leads to the local crumpling on the side of the head edge and the initial stage of peel. Fissure of the surface layer of metal leads to disappear contact stresses in this place of the rail head , since the contact of the wheel and the rail at the corresponding points of the head becomes impossible.It is established that on the surface of the layer there is a hardening. In this connection, the yield stress increases accordingly. The degree of hardening is not the same in depth. The increased value of the yield point near the surface of rolling is replaced by the normal value of the yield point at a certain depth.That is, the upper layers of the railhead become non-uniform, in terms of the fluidity bounds. The calculations of the tense and deformed state of rail head were conducted in the zone of contact under simultaneous influence of normal and tangent constituent of pressure of wheels.
Authors and Affiliations
S. Timofeyev, N. Ohulchanska
Keywords
Related Articles
- EP ID EP497654
- DOI 10.18664/ikszt.v0i5.115678
- Views 142
- Downloads 0
Аbout reliability of technical devices, undergone repair
Article purpose – to offer and investigate expressions for definition of average failure rate and a time between failures of the repaired technical devices, the non-failure operation restitutions differing in depth.Value...
A mathematical model of the rail, which has inertial characteristics, under the action of a speed mobile composition
An investigation into rail track operation under loads from the rolling stock by applying numerical methods makes it possible to obtain information on the impact on track and features of the deflected mode of the whole s...
Formation of model of risk assessment during the operation of wagons with hazmat at switchyards with use of mathematical apparatus of fuzzy logic and Bayesian nets
The first stage in the developing a modern automated risk management system at the switchyards is the formation of an adequate model for assessing the risk of an accident with wagons with hazmat. The model of estimation...
Formation of the information and control system of strategic planning of speed passenger transportation on railway transport
An analysis of the implementation of recent projects to increase the speed of passenger trains in the existing system of managing rail passenger transportation in Ukraine allows us to draw the following conclusions: deci...
Research of technical efficiency of the telecommunication systems and networks in case of use of different methods of data transmission with the managed reverse communication
The methods of data transmission with the managed reverse communication were considered: method with the stop-and-wait automatic repeat request, method with continuous automatic repeat request with pullback and method wi...