FEATURES OF TRANSITION MODES OF FRICTION SURFACES WITH PARTIALLY REGULAR MICRORELIEF
Journal Title: Проблеми тертя та зношування - Year 2016, Vol 71, Issue
Abstract
The methodology of experiments and the results of the study of transition modes of friction on surfaces with partially regular micro relief was presented. In this article the influence of micro-groove on the surfaces with partially regular micro-relief (PRMR) upon appearance of various friction modes – boundary, semi-fluid and fluid was investigated. The research was conducted on tribometer with a precision control of the friction coefficient, rate of change of temperature and the type of waveforms under different conditions of friction. The conducted investigation helped to discover the effect of hysteresis for friction coefficient when the sliding speed, was altered.
Authors and Affiliations
M. V. KINDRACHUK, A. V. RADIONENKO
Keywords
Related Articles
- EP ID EP191694
- DOI -
- Views 63
- Downloads 0
INFLUENCE OF THE STRUCTURE, PHASE COMPOSITION AND PROPERTIES ON ABRASIVE WEAR RESISTANCE OF CHROMO-MAGNETIC CAST IRONS IN THE CAST STAY
Influence of the structure, phase composition and properties on abrasive wear resistance chromo-manganese cast irons in the cast stay were investigated. It is shown that the abrasive wear resistance of chromo-magnetic ca...
TO THE QUESTION OF CALCULATION AND DESIGN OF DIFFERENT TYPES OF DISKS FOR THE SUBJECTS OF MOTOR VEHICLES
In disk-block brakes use both solid and self-ventilated discs with a developed system of venti-lation holes and channels in the body of the disc with polished and matte its side surfaces. These surfaces interact with hig...
ONE THEORETICAL ASPECT OF ENTROPY PARADIGM APPLICATION TO THE PROBLEMS OF TRIBOLOGY
The paper theoretically considers the possibility of the subjective analysis core statement application to tribology. The subjective entropy extrimization principle is proposed to be used for solving tribological problem...
COMPARISON OF FRICTION EFFECTS IN THE ENVIRONMENT WITH USING ALGORITHM, WHICH IS BASED ON THE EQUATIONS OF PRESSURE OR DENSITY AT STUDY OF TURBOFAN MODEL
Using mathematical models for describing of characteristics of engine noise requires careful selection of the methods, what used during the modeling. That’s why it is necessary to compare and find those equations that ma...
INVENTORY OF CONTAMINATION SUBSTANCES EMISSIONS FROM FUEL TANKS IN FUELS AND LUBRICNTS STORAGES
This article shows how contamination emissions in storages calculated. The imperfection of different methods of emissions inventory was identified. It was found that regulations are supplemented by new criterias. In this...