Features reversible thyristor contactless synchronous rectifier machines depending on the control angle
Journal Title: Вісник Національного технічного університету "ХПІ". Серія: Проблеми удосконалювання електричних машин і апаратів. Теорія і практика - Year 2015, Vol 42, Issue 1151
Abstract
Techniques for calculating the characteristics of reversible thyristor rectifier for contactless synchronous machines, depending on the angle of thyristor control, are presented. Calculation of the protective circuits of thyristor rectifier is held at a zero control angle following the method of calculation of diode rectifiers. Changing thyristor control angle from 0 to 90 degree does not increase the maximum stress voltage on the thyristor. Calculation models of thyristor rectifier is conducted in the circuit simulation in a quasi-steady or transient operating conditions. The calculation models rectifier in transient modes of operation are limited to the number of variables, the current numerical values are recorded in the memory of the program, the calculation is performed at a frequency thyristor control the lower frequency power supply rectifier. The results of calculation models rectifier diode and transistor should be used in the comparative analysis of contactless synchronous machines exiters.
Authors and Affiliations
А. М. Galynovskiy, E. А. Lenskaya
Keywords
Related Articles
- EP ID EP408831
- DOI -
- Views 95
- Downloads 0
Improving the energy performance of the electric traction drive for tram with DC motor with series excitation
Most part of the tram park of Ukraine uses energy-intensive traction electric drive with DC motors with series excitation with rheostat control. The purpose of work is development circuit design of the traction unit on t...
Improving the reliability of protection of household electric networks by using complex criteria of actuation protective devices
The necessity and possibility of increasing the reliability of protection of household electrical networks due to the transition to comprehensive criteria of tripping formed from a combination of several parameters of th...
The choice of a rational number of sources of power system load mutual traction electrical machines
Problems of selection of rational variants of traction electric machines mutual loading schemes to carry out their acceptance test are considered. It is substantiated that discrepancy of magnetic characteristics of tract...
The analysis of datas of temperature calculation of high-voltage cables with cross-linked polyethylene insulation
World tendecies in the development of high voltage energy distribution systems for the last decades have been focused on implementing of cables with heat-resistant extruded insulation. This cables have a range of advanta...
Automated system for remote control of power facilities with a low quality of electricity
In the development of science and technology, development of novel technologies, increase of energy security of Ukraine and increase of precision of parameters of transmission of electrical energy, the telemechanization...