Finite Elelment Analysis of A Cantilever Beam Using Piezoelctric Actualtors
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 12
Abstract
In this present scenario deformation is the major problem in structural design. In Aerospace and satellite objects, faces a major problem of static deformation due to many parameter uncertainties and environmental disturbances. Many researchers have studied and found that active control is frequently being used in aircraft, submarine, automobile, helicopter blade, naval vessel. The study uses ANSYS software to derive the finite element model of the beam. Analytical and Numerical results are presented to show the static and dynamic behavior of aluminum beams with piezoelectric actuators. Experimentation was also conducted to verify the analytical and numerical results. Experimentation was also conducted to verify the analytical and numerical results. The effect of the number and locations of the actuators on the control system are also investigated
Authors and Affiliations
Kamini P. Bhavsar, Dr. Prashant Deshmukh
Keywords
Related Articles
- EP ID EP393015
- DOI 10.9790/9622-0712042329.
- Views 87
- Downloads 0
Characterization of irrigation techniques and typology of vegetable gardens in the districts of Covè and Zangnanado in center of Benin
The main objective of this study was to contribute to a better knowledge of the vegetable farm types in the centre of Benin and made inventory of the different irrigation techniques used in the area.To achieve this objec...
Photon Cross Section Studies of Nickel Based Alloys and Special Alloys at Energies 42.0 Kev - 59.54 Kev And 145.4 Kev – 661.6 Kev.
The Photon cross section studies of nickel based alloys and special alloys are measured using gamma ray spectrometry based NaI (TI) scintillation detector with four energies, i.e., 42.0 KeV, 59.54 KeV and 145.4 KeV, 661....
Efficient Way to Improve Subgrade Property of Pavement by Chemical Stabilization
There are numerous soil stabilization techniques for improving the strength of the in-situ soil especially in road construction, and one of the techniques is using chemical additive. Chemical improvement is a time saving...
Predicting the Nonlinear Material Behaviour under Monotonic and Cyclic loading of SA333 and SS3304 Steels
Nonlinearity naturally arises in a true, rigorous mathematical formulation of physical problems. One of the most common nonlinearity is the material nonlinearity where the stress-strain response behaves nonlinearly. The...
Assessment of Physico-Chemical and Biological Parameters of Sanjay Lake and Old Fort Lake Water In Delhi
Water is the most essential requirement for the human survival. With daily human consumption of about 80 L/day/person and increasing population ,the consumption and scarcity in the fresh water sources increases by many f...