Photon Cross Section Studies of Nickel Based Alloys and Special Alloys at Energies 42.0 Kev - 59.54 Kev And 145.4 Kev – 661.6 Kev.
Journal Title: International Journal of engineering Research and Applications - Year 2018, Vol 8, Issue 7
Abstract
The Photon cross section studies of nickel based alloys and special alloys are measured using gamma ray spectrometry based NaI (TI) scintillation detector with four energies, i.e., 42.0 KeV, 59.54 KeV and 145.4 KeV, 661.6 KeV respectively. The samples, such as nickel based alloys and special alloys are collected from various manufacture companies in INDIA. Photon cross section values are measured from the experiment and compared with theoretical values of Strom-Isreal and Veigele by the using of XCOM programme. Experiment values are very good agreement with theoretical values.
Authors and Affiliations
S. Thomas Reddy, Yalagalasandeep . , V. Nathanial, D. V. Krishna Reddy
Keywords
Related Articles
- EP ID EP394486
- DOI 10.9790/9622-0807012630.
- Views 127
- Downloads 0
Data Center: Energetic and Economic Analysis of a More Efficient Refrigeration System with Free Cooling and the avoided CO2 Emissions
The use of air conditioning equipment is becoming more frequent, and new technologies are emerging to increase the efficiency of the process and decrease the operating costs of air conditioning systems. In data centres,...
Field Effects on Multiple Particle Contamination And Breakdown Voltage Inside Gas Insulated Bus Duct.
The metallic particle contamination in the Gas-Insulated Systems (GIS), plays a key role for the occurrence of Partial Discharge (PD), which causes the failure of insulation in the GIS. This paper presents the study of f...
Pseudomonas aeruginosa and pyocyanin negatively act on the establishment of Enterobacteriaceae biofilm on a ceramic surface
The occurrence of biofilm on the porous surface of ceramic water filters and their candles may increase the risk of transmission of pathogens, especially enterobacteria. In addition, more than 90% of strains of Pseudomon...
Effect of Soil-Particle and Pore Orientations on Uniaxial Compressive Strength
The main objective in the compaction of earth dams, highway embankments, bridge abutments and fills behind retaining walls is to increase the strength of the soils. Compressive strength value of the samples is controlled...
FE Simulation Modelling and Exergy Analysis of Conventional Forging Deformation Behaviour of Material Processing
The present paper examines the deformation behaviour of geometrical specimens of an aluminium alloy undergoing axial compression in a Universal Testing Machine under dry condition. It is observed that researchers have ma...