Fluid Flow Particularities within Hydraulic Working Circuit
Journal Title: HIDRAULICA - Year 2018, Vol 0, Issue 3
Abstract
As is known from the principles of fluid mechanics, the flow phenomenon of the working fluid within a hydraulic circuit is always accompanied by energy losses that are inevitably determined by the frictional forces with the pipe walls, the geometric shape of the pipeline used in the circuit but also the inner walls roughness of the circuit pipeline which interacts with the fluid. The fluid environment is used within the hydro-static systems in order to transmit the energy representing the support which, by simply circulating in the circuit to the execution organs, causes different device movements (rotation or translation) as a result of directly action. Forced flow of the working fluid inside the circuit is a complex phenomenon of continuous or non-permanent flow which involves the general laws and equations of the customized fluid mechanics for specific working situations of the hydro-static drive systems.
Authors and Affiliations
Fanel Dorel SCHEAUA
Keywords
Related Articles
- EP ID EP485571
- DOI -
- Views 170
- Downloads 0
Comparative Study of a 1D and 2D Numerical Analysis Modelling a Water Flow at a River Confluence under Accidental High Waters
There are presented two numerical simulations – 1D and 2D – regarding the water flow on Timiş River in the Town of Caransebeş, Romania, at the confluence with its tributary Sebeş River. There was considered an accidental...
A Method to Address the Fixing of Sealing Deficiencies at the “Ostrovul Mic” Left Bank, “Râul Mare - Downstream” Water Development
The present paper proposes a method for approaching the remediation of sealing deficiencies from the left bank of Ostrovul Mic water reservoir at km1+300 (Raul Mare – Downstream water development) by executing a drain at...
The 3D Geometry Reconstruction of a Scaled Axial Blade by Photogrammetry
The paper illustrates the Reverse Engineering of an axial blade geometry, who was scanned through Photogrammetry technique and processed with the following software packages: Agisoft Photoscan and Geomagic Design X; the...
Algorithm for Optimal Design of Pressurized Toroidal LPG Fuel Tanks with Constant Section Described by Imposed Algebraic Plane Curves
The purpose of this study is to provide a tested, validated, and documented algorithm for optimal design of pressurized toroidal LPG fuel tanks with constant section described by imposed algebraic plane curves. Computer...
Improving Roughness Using Toroidal Milling for Complex Surface Processing
The paper aims to study the processing of complex and convex surfaces using a cutting tool in a milling radius called toroidal end milling in terms of roughness. Roughness presents important influences on machine parts a...