Forced Convection and Pressure Drop of CuO-TiO Nano-Particle-Fluid Inside Minus Slope Microfin Pipe under Constant Wall Temperature
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
In this article, empirical analysis of the effects of forced convection and Darcy friction factorise done using nano-fluid and downward flow in negative incline tube. This can be affected by boundary condition when the flow regime was fully developed and laminar, and wall temperature was isothermal. The use of nano-fluid, negative slope can have effect on the augmentation of forced convection. Two equations have been strongly suggested to be estimate the forced convection and pressure drop in a downward flow. The peaked deflection of isothermal and Darcy friction factor are 20% and 21% respectively. The results show that the use of equation is appropriate as long as these are used in experimental investigation. In addition forced convection ratio with ratio of pressure drop is calculated. As long as the rise of figure of merit is more than a unit, It is no longer suitable to apply CuO-TO nano-fluid, minus slopes and micro fine pipe. The maximum FOM is 1.59% extracted with 1.5% weight fraction and slope of 60ºat Prandtl number of 310. The upshots illustrate majority of the quantities is more than a unit, and as a consequences the heat transfer improvement is more than rise of pressure drop.
Authors and Affiliations
Farhad Hekmatipour, Milad Jalali, Farzad Hekmatipour
Keywords
Related Articles
- EP ID EP671642
- DOI 10.24247/ijmperdoct201915
- Views 104
- Downloads 0
PORT DEVELOPMENT IN SUPPORTING CONNECTIVITY SYSTEM OF ARCHIPELAGO REGION
The development of port infrastructure and connectivity between ports could influence the economic improvement of natural resources potency related to the population prosperity. Therefore, port development is needed -so...
Design and Simulation of Spot Welding Process
The presented work confirmed that the use of resistance spot welding process in industry can be considered as one of the widely processes applied for sheet joining purposes. Finite element modelling technique is an effic...
Investigating the Effect of the Various Stiffness Coefficient on the Controlled Damper Mass Spring System Based on the Electromechanical Sensor
This work is concerned with investigation the effect of the stiffness coefficient for the spring elements in the mechatronics applied system consists of damper mass spring system linked to the electrical position sensor....
Total Quality Management; Concept, Implementation, Obstacles and Benefits
In the past few years, the globe of industry has altered immensely. The individuals of different fields cannot be able to visualize that, what's about will be the long run image if the transformation prolongs with this s...
Investigation Study on Effective Tools for Conscription of Various Industrial Applications
Improper selection of worker or supplier may lead an unpleasant impact on original equipment manufacturer. The greatest challenge for every industry is the acquisition of workers with talents and the strength of the supp...