FRICTION RESISTANCE IN SLIDE/ROLL MOTION FOR CHOSEN POLYMERS AGAINST STEEL
Journal Title: Tribologia - Year 2014, Vol 256, Issue 4
Abstract
The paper describes the study of polymer-steel sliding pairs during slip-roll motion. The analysis focused on the frictional forces at various rolling to slip ratios. The kinematic parameters of the friction node were the angular velocity of the steel cylinder – ω, and the linear speed of the polymer plate – vp. In the experiment, the geometrical slip speed was constant at s = 25 mm/s for each case. Constant geometrical slip speeds for different values of the plate speed (traverse of contact point) vp allowed the determination of the influence of this parameter on the friction force. Materials that were tested had different values of the elastic modulus (Young's modules) POM, POM + 40% GF and PE-UHMW. They worked against steel C45. The results of the experiment showed the plate speed impact (the contact point's traverse) vp on the friction force values. It was demonstrated that friction force depends on the mechanical properties of the polymer and kinematic conditions.
Authors and Affiliations
Piotr KOWALEWSKI
Keywords
Related Articles
- EP ID EP262710
- DOI -
- Views 57
- Downloads 0
Zasady wymiany informacji naukowej
W opracowaniu przedstawiono zasady wymiany informacji naukowej. Zaprezentowano elementy tej wymiany ze szczególnym uwzględnieniem dyskusji naukowej. Omówiono rolę i główne zasady prowadzenia dyskusji.
Testowanie właściwości eksploatacyjnych ekologicznych smarów plastycznych modyfikowanych dodatkiem polimerowo-krzemionkowym
W publikacji przedstawiono wyniki badań dotyczące wpływu opracowanego dodatku polimerowo-krzemionkowego na zmianę trwałości zmęczeniowej łożysk smarowanych ekologicznymi kompozycjami smarowymi. Ocenie poddano smary plast...
INTERACTIONS BETWEEN LUBRICANT AND STEEL SUBSTRATE – A CONCEPTUAL METHOD OF ANALYSIS
The paper demonstrates the methods for the analysis of the interaction between lubricant and steel substrate and presents the obtained results. The samples to be tested were commercially available greases as well as grea...
THE TRIBOLOGICAL PROPERTIES OF FERROUS BASED COATINGS FORMED USING DIFFERENT TECHNOLOGICAL METHODS
Plasma-sprayed coatings on the base self-fluxing alloys were investigated. Clean ferrous-based alloy P-Cr16Fe5B4Si4 was used as well as the same with the addition of TaB, MoB, and B4C powders. Fire and laser washing were...
OPERATIONAL EVALUATION OF PISTON-RINGS-CYLINDER LINER ASSEMBLY WEAR IN HIGH POWER MARINE DIESEL ENGINES
This paper presents an operational evaluation of piston-piston rings-cylinder liner (PRC) assembly wear in marine diesel engines of high power. It is based on visual inspection through cylinder liner scavenge ports. Clea...