INTERACTIONS BETWEEN LUBRICANT AND STEEL SUBSTRATE – A CONCEPTUAL METHOD OF ANALYSIS
Journal Title: Tribologia - Year 2017, Vol 271, Issue 1
Abstract
The paper demonstrates the methods for the analysis of the interaction between lubricant and steel substrate and presents the obtained results. The samples to be tested were commercially available greases as well as greases developed for the purpose of this research, containing a known amount of adhesion additives. Due to the lack of normalized methods, the authors applied indirect methods based on the analysis of the peel resistance and the resistance to variable shearing rates. The obtained results reveal that there is a possibility to apply the proposed methods for the comparative assessment of interactions between the grease and steel substrate.
Authors and Affiliations
Ewa PAWELEC, Mirosław NESKA
Keywords
Related Articles
- EP ID EP240548
- DOI -
- Views 63
- Downloads 0
THE ANALYSIS OF BIOMECHANICAL STATE IN A HIP JOINT AFTER COMPLETE ALLOPLASTICS WITH DIFFERENT VARIANT OF CEMENTLESS ENDOPROSTHESIS
Modelling and simulation of the stress distribution and displacements in the applications with cementless endoprosthesis of a hip joint were carried out. The analysis subjected biobearings with cups of layered structures...
Modelowanie i badania eksperymentalne pękania cienkich powłok ceramicznych i węglowych
Praca zawiera analizę deformacji i naprężeń prowadzących do niszczenia układów powłoka–podłoże przez odkształcenia plastyczne podłoża i pękanie twardych powłok. Do analizy wykorzystano obliczenia numeryczne metodą elemen...
TRIBOLOGICAL PROPERTIES OF FRICTIONAL MATERIAL APPLIED ON BRAKES
In paper tribological properties (average and instantaneous coefficient of friction, wear and temperature) for frictional connection created from frictional material MKW-50A and cast iron EN-GJN-HV600(XCr14) are presente...
EFFECT OF LONGITUDINAL VIBRATION PARAMETERS AND STIFFNESS OF CONTACT ON DRIVING FORCE REDUCTION IN SLIDING MOTION
The simulation tests results of the influence of amplitude of longitudinal tangential vibrations velocity as well as the influence of contact shear stiffness on driving force which is necessary for initiation and mainten...
Formation of Cu-Mo anti-wear coatings and their tribological properties before and after laser treatment
The paper is concered with determining the influence of the laser treatment process on the <b>exploitation</b> properties of electro spark coatings. The properties were assessed after laser treatment by analysising micro...