Functional Model of Savonius Type Vertical Axis Wind Turbine with Periodic Coupling of Adjacent Vertical Blades
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 4
Abstract
The field of HAWT (Horizontal Axis Wind Turbines) regarding the use of wind energy (WE) as a renewable energy source (RES) is well researched and the results are covering both the power range and efficiency. Deficiencies observed during high wind speeds affect the investment costs. Savonius is a VAWT (Vertical Axis Wind Turbine) used for low wind speed, with low costs and low efficiency. The study proposes a conceptual model of Savonius type of VAWT (SWT) meant to increase the efficiency by reducing the resistance of the returning blade. SWT conceptual models were studied and analyzed and then a MC was elaborated and a MF and MM have been developed. An ME was made based on the MC and MF, which was used in wind tunnel experiments. The starting torque, the power factor, the efficiency, the speed and the output voltage of the generator were investigated. The results confirm the viability of the model and its resources to increase efficiency.
Authors and Affiliations
Nelu CAZACU, Catalin Bogdan LUCACI
Aspects Regarding the Biocorrosion of the Paper Manufactured Machines
This paper presents the main microorganisms causing biocorrosion, the concentration, their effects and a series of measures for their reduction. The conclusion is that the sulpho-reducing bacterius are responsible for th...
Mathematical Modelling of the Main Carburizing Thermochemical Treatment Parameters Influence on the Surface Hardness Parts Made in AMS 6265 (SAE 9310) Steel
This work is a part of broader experimental research study on the influence of the main process parameters (thermal, temporal and chemical of carburizing thermochemical treatment on the level of the main microstructural...
Experiments on Ballistic Tests for Improving Performance of a Neutralizing Gas Dynamics System
Neutralizing improvised explosive devices (handmade) by mechanical separation of the elements which are part of their composition can be achieved by the following methods: - generation of shock waves by means of the impa...
Dimensional Changes in Some Iron-Based Powder Metallurgy Alloys
The purpose of this paper is to present the dimensional changes in some ironbased (P/M) alloys. The specimens produced from atomized iron powder and alloyed powder with different sizes (< 45, 45-63, 63-100, 100-150, >150...
The Process Involved in Making the Medals
This paper presents a method that was experienced in the laboratory to manufacture a medal. There are three general techniques used to make medals: repoussé, striking and casting. Serigraphy technique is the most chosen...