Generalized PWM Control of Dual Inverter Fed Induction Motor Drive
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2018, Vol 13, Issue 1
Abstract
A simplified generalized pulse width modulation (GPWM) algorithm is proposed to obtain various continuous and discontinuous PWM algorithms for a four level inverter topology. Induction motor both sides are fed with a three-level inverter from one side and a two-level inverter from the other side. The proposed configuration is capable to produce an output voltage of two-level, three-level and four-level in entire modulation range. Neutral clamping diodes and neutral point fluctuations are absent in the proposed inverter topology. In the proposed inverter topology the switching losses are reduced with the application of various discontinuous PWM algorithms compared with continuous PWM algorithms. Simulation analyses are carried out in MATLAB/SIMULINK environment and the results are presented.
Authors and Affiliations
B Ravichandra Rao, G. V. Marutheswar
Keywords
Related Articles
- EP ID EP388658
- DOI 10.9790/1676-1301030109.
- Views 144
- Downloads 0
Comparison of Solar Photovoltaic Energy Systems Fixed Installation configuration with Single Tracking System
This paper describes the fixed PV systems tilt angle and the single tracking system. It looked at the performance of each system in terms of the voltage output and compares the two to find a better performing system. Thi...
Wastewater from Biodiesel Purification: Electroflocculation Treatment and Iron Perchloride Synthesis for Printed Circuit Boards Production.
Biodiesel production by alkaline catalysis on methane route generally requires a purification step, generating wastewater that presents contaminating components in its composition, preventing it to be disposed, as establ...
Portable Fire Detector
This paper describes the design of a portable fire detector which can easily detect the sudden rate of change of temperature and sound an alarm if preset value are exceeded. The detector is said to be portable because it...
Microcontroller Based Colour Identification System
A microcontroller based system using P89V51RD2 microcontroller for colour identification system is designed and developed. It is based on the principle that the analog voltages of the sensor converted to RGB colours. The...
Implementation of Wireless Hart Protocol Using Starter Kit DC9007
The wireless HART standard is the first open standard wireless communication standard for control and measurement in process industries. It uses secure time synchronized mesh networking with frequency hopping between the...