Geometrical and mechanical analysis of 3D casted skeleton structure
Journal Title: Archiwum Odlewnictwa - Year 2010, Vol 10, Issue 2
Abstract
The article presents selection of the geometry of engineering casted skeleton structure using the analysis of the stress state of structural variants. The main criterion for selection was using the simplest geometry of casting techniques for the manufacturing of the skeleton castings. Preliminary simulations of stress in the casting virtual. Analyses were carried out in an ANSYS Multiphysics environment. Macrostructure of casting were selected for testing on the actual model.
Authors and Affiliations
M. Cholewa, T. Szuter
Keywords
Related Articles
- EP ID EP71744
- DOI -
- Views 96
- Downloads 0
Primary and secondary crystallization of modified hypoeutectic chromium cast iron
The paper presents investigations of crystallization of modified hypoeutectic wear resistant chromium cast iron which contains carbon about 2% and chromium on three levels (12%, 18% and 25%). Three substances were applie...
Trials to manufacture and test castings from Inconel alloy
The article describes the methods of producing and testing the Inconel 740 nickel alloy in as-cast state. An assumption has been made that the obtained alloy should be characterised by a normative chemical composition an...
The assessment of hot cracking susceptibility of ferritic-austenitic cast iron
An inspiration to the research work has arisen from the problems related to cracking of massive castings made of ferritic-austenitic cast steel. The shape and the character of crack trajectories indicate that they are ho...
Research on possibility of microwave measurements application for determination of adhesive ingredient content in moulding sand
This paper presents preliminary results of the research on possibility of determination of adhesive material content in classical moulding sands with application of microwave measurements. Presented results have been obt...
The structure of Ni–enriched Al–Ni molten alloy before solidification
The structure of Ni–based molten alloy, containing 88,02w.%Ni and dopped both with Zr (0,46w.%) and B (0,02w.%) has been studied by means of X–ray diffraction method at temperature 1500 K. Structure factor and pair corre...