The structure of Ni–enriched Al–Ni molten alloy before solidification
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 2
Abstract
The structure of Ni–based molten alloy, containing 88,02w.%Ni and dopped both with Zr (0,46w.%) and B (0,02w.%) has been studied by means of X–ray diffraction method at temperature 1500 K. Structure factor and pair correlation function were obtained from diffraction data and analyzed. Principal peak position in structure factor for doped molten alloy is compared with one for liquid Ni3Al intermetallics. Another structural parameters–most probable interatomic distance and number of neighbours have been also determined from pair correlation function and compared with parameters of crystalline structure for Ni3Al chemical compound. The structure data are interpreted with using of cluster models of metallic melts.
Authors and Affiliations
Z. Bojar, V. P. Kazimirov, S. I. Mudry, W. J. Prokhorenko, S. W. Prokhorenko, P. Jóźwik
The influence of the arc plasma treatment on the structure and microhardness 100Cr6 bearing steel
The effect of arc plasma treatment on structure and microhardness of 100Cr6 steel was investigated. Four different the current intensity has been used to remelting surface of the steel. SEM and LM microscopes have been u...
The dimensional and shape accuracy of vacuum castings prepared in plaster moulds
The results of laboratory test on the dimensional and shape accuracy of bronze plaster castings CuSn10, CuSn5Zn5Pb5and AlSi11 silumin are presented in this paper. The test castings were made in form of rods of length 100...
Heat resistance of Fe-Al intermetallics in the context of selected heat-resistant and hihg-temperature creep resistant steels
Results are hereby presented of heat-resistance tests of two Fe3Al and FeAl intermetallic phase-based alloys in the context of St41k-type boiler steel and 50H21G9N4 high-temperature creep resistant steel. It has been asc...
Influence of vibrations during crystallization of EN AC-ALSi13Cu2 alloy on mechanical and porosity properties
Today’s industry aims at such situation, where number of defective products, so called defects shall approach to zero. Therefore, one introduces a various changes in technology of production, introduces improvements whic...
Influence analysis foamed polystyrene model on casting defects as well as microstructure ductile cast iron from Lost Foam process with Inmold method
In this work was shown a influence analysis foamed polystyrene model on casting defects as well as microstructure ductile cast iron from Lost Foam process with Inmold method.