GRADIENT-BASED VEHICLE DETECTION USING A TWO-SEGMENT DETECTION FIELD
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2017, Vol 96, Issue 96
Abstract
This paper presents a method of vehicle detection using the conversion of images from a source image sequence into binary target images. This conversion is performed on the basis of small image gradients. The location of binary values after conversion is in accordance with the edges of the converted image. For all processed images, a detection field is defined, which is composed of two segments. In the area of each segment, the sum of the edge values is calculated. On the basis of the calculated sums within the segments, an adjusted sum of the edge values is established, which allows for the determination of the state of the detection field. Vehicle detection is carried out by recognition of distinctive changes in the state of the detection field caused by the passing vehicle. Experimental results are provided.
Authors and Affiliations
Zbigniew CZAPLA
Keywords
Related Articles
- EP ID EP231099
- DOI 10.20858/sjsutst.2017.96.3
- Views 77
- Downloads 0
OPTIMAL TUNING OF MECHANICAL SYSTEMS BY APPLICATION OF A PNEUMATIC TUNER OF TORSIONAL OSCILLATION
Reducing the dynamic load of any mechanical system can be achieved when the torsional vibration magnitude is optimized by applying a pneumatic tuner of torsional oscillation. Changing the torsional stiffness of a pneumat...
ANALYSIS OF RAILWAY WHEEL LOADS
Analysis of impact of design and service parameters of 152Aa passenger carriage on forces acting upon wheels is presented in this paper (different runs over different track sections were simulated). Carriage model was cr...
LIVE ANIMALS REGULATIONS CHOSEN ASPECTS OF AIR TRANSPORT OF ANIMALS
The article presents important aspects of the air animal shipments. Carriage of live animals by air is the one of most important issue. From one side, the transport should be organized in the way ensuring possible, the l...
MOUNTABILITY PARTS OF MACHINE WITH ROTATING SURFACE, FITTED WITH POSITIVE CLEARANCE
In this paper demonstrates the conditions of automatic assembly the parts of machines with rotating surfaces, fitted with positive clearance. Determination of the general condition of asseblability allowed for designatio...
BARIERY EKSPLOATACYJNE W PRZEKŁADNIACH ŚLIMAKOWYCH
Decydującym czynnikiem określającym trwałość przekładni ślimakowych są materiały, z których wykonane są elementy przekładni. W odróżnieniu od przekładni zębatych, praktycznie w większości przypadków, współpracujące eleme...