GRINDING FORCE STUDY IN MICRO END GRINDING OF HARD AND BRITTLE MATERIALS
Journal Title: Frontiers in Manufacturing Engineering (FME) - Year 2018, Vol 2, Issue 1
Abstract
Hard and brittle materials with good physical properties of high hardness, high uniform structure et al, are occupied with a larger proportion in microproducts yearly, but the current processing method can not solve the difficult-to-machine property of it commendably. For this purpose, this paper proposes a promising processing method, Micro End Grinding (MEG). Abrasive’s random distribution and material inhomogeneity generate that the study of the microgrinding mechanism is difficult, so this paper researches the grinding forces and the grinding force ratio through experiments which test material is silica glass, which are important factors of the grinding process. The influences of grinding parameters on variation tendency of grinding forces are investigated, and they are affected very much by the size effect. Meanwhile, experimental results verify that the ratio of the grinding forces is much less than the value of peripheral grinding. It will lay a good foundation for further mechanism study.
Authors and Affiliations
Shuo Zhang, Yan Zhao, Fuqiang Tian, Hui Li, Ruizhen Dai,, Zhi Wei
Keywords
Related Articles
- EP ID EP404441
- DOI 10.26480/fme.01.2018.08.10
- Views 62
- Downloads 0
Information Technology, Indian Institute of Information Technology, Allahabad, India
In the fracturing process, the pressure sleeve opening pressure often unusual circumstances, After Analyzing structure and principles of common pressure sleeve, analyzing and summarizing its problems encountered in the S...
SIMULATION OF ULTRASONIC FLOW POLISHING INSIDE THE MOLD CAVITY
The UDF program is written to simulate the cavitation characteristics of polishing media generated by ultrasonic vibration in the mold cavity based on CFD. The simulation results reveal the motion state of polishing medi...
GRINDING FORCE STUDY IN MICRO END GRINDING OF HARD AND BRITTLE MATERIALS
Hard and brittle materials with good physical properties of high hardness, high uniform structure et al, are occupied with a larger proportion in microproducts yearly, but the current processing method can not solve the...
A TUBE FLEXIBLE ASSEMBLY AND WELDING SYSTEM BASED ON PHOTOGRAMMETRY AND ROBOTS
To improve the efficiency and accuracy, as well as decrease the cost of the tube assembly and welding, this paper presents a tube flexible assembly and welding system based on the combination of photogrammetry and cooper...
DATA ACQUISITION AND PROCESSING TECHNOLOGY FOR FLIGHT SIMULATOR DATA PACKAGE
In this paper, we present the data acquisition and processing technology for the flight simulator data package, which is the key stage for the development of the flight simulator data package. It is important to cooperat...