Hafif Silahlarda Kullanılan Farklı Kesit Profiline Sahip Yerine Getiren Yayların Yorulma Davranışlarının İncelenmesi / Investigation of Fatigue Behavior of Performing Springs with Distinct Cross-section Profiles Used in Light Weapons
Journal Title: Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / Recep Tayyip Erdogan University Journal of Science and Engineering - Year 2020, Vol 1, Issue 2
Abstract
It is important to carry out studies since the performance of small arms has been improved in recent years. The aim of this study is to evaluate the performance of flat wire springs, which have been increasingly used in recent years, instead of circular cross section springs used in weapon production, and to increase the spring performances of guns and thus gun performances with the results of the experiments. With the findings obtained as a result of the study carried out in line with this purpose, it is aimed to contribute to the defense industry knowledge of our country by closing a gap in the literature. In the light weapons industry, it has been observed that the use of fulfilling springs made of flat wire has increased in recent years as an alternative to the fulfillment springs produced from circular section wires. In this study, the performing spring used in the semi-automatic pistol, which is the most common of the small arms group, was designed as a round and flat wire spring, and sample production was carried out. In order to evaluate the life and performance of the springs, compression, fatigue and life tests were applied, and the changes in both springs were examined. According to the test results, the losses seen in the L0 (free length), P1 (upper working range spring force) and P2 (lower working range spring force) values of the flat wire springs are less than the round wire springs and the flat wire springs have higher performance depending on the operating conditions. It is concluded that they show. It has been observed that the performance losses occurring especially in P1 values are much higher in round wire springs.
Authors and Affiliations
Serkan GÜREL, Samet YAVUZ, Mahmutcan KARSLI, Ş. Burhanettin ALTAN
Keywords
Related Articles
- EP ID EP694334
- DOI -
- Views 144
- Downloads 0
Kahramanmaraş Sütçü İmam Üniversitesi Kampüs (Avşar) Alanı Florası ve İnsan Sağlığı Üzerine Etkileri / The Flora of Kahramanmaraş Sütçü İmam University Campus (Avşar) Area and Effects on Human Health
Kahramanmaraş Sütçü İmam University Avşar Campus area is located on the west side of the city of Kahramanmaraş, within the Mediterranean phytogeographical region and on the C6 square in Davis’s grid system. With this st...
Description of the Native Hybrid Population Between Squalius semae and Alburnus sellal Distributed in the Upper Euphrates River
In the scope of this study, the first description of the hybrid population of Squalius semae and Alburnus sellal from the upper Euphrates River is presented. The description was made based on museum material which collec...
The Effect of Chemical Fertilizers Used in Tea Agriculture on Groundwater in the Region of Rize
In this study, water samples were taken from the drinking water of 12 villages, selected as samples from the villages in Rize province, before (April 2017), and after (August and November 2017) the fertilization period o...
Meyve Ağaçlarında Kısırlıklar ve Uyuşmazlıklar / The Incompatibilities and Infertilities in Fruit Trees
For sustained and profitable fruit growing, an orchard should be established with species and varieties with wellknown fertilization biology. The essential precautions should be taken in the case of the existence of ins...
Açık Deniz Rüzgâr Sistemleri Üzerine Bir İnceleme ve Danimarka Modeli / A Review Study on Offshore Wind Systems and the Danish Model
The increasing energy demand in the world and the related new studies make offshore wind turbine applications a preferred renewable energy source nowadays, especially in Europe. In this study, offshore wind turbines and...