Hardware Implementation of a Closed Loop Controller on 6R Robot using ARM Microcontroller
Journal Title: International Research Journal of Applied and Basic Sciences - Year 2013, Vol 4, Issue 8
Abstract
In this article, the hardware implementation of a closed loop controller on 6R robot via ARM microcontroller is presented. The implementation is derived in two levels. Firstly, programming with IAR software is expressed, embedded C base language programming. The programming consists of several parts such as running the microcontroller, defining the characteristics of the motors of the manipulator and its limitations, feedback section and the main control loops. The control loops are provided in two categories, point to point motion and trajectory tracking. Secondly, hardware implementation of the ARM microcontroller, a Cortex M3 processor, on a digital board is provided. The high speed computation ability of this processor, LPC 1768, prepares the situation for applying different control algorithms. The PID control as the first candidate is used for simulating and experimenting point to point and continuous motions via 6R robot. This hardware and software developments demonstrate that the quality of the tracking and regulation of 6R are improved.
Authors and Affiliations
M. H. Korayem*| Professor, PhD Student, Robotic Research Laboratory, School of Mechanical Engineering, Iran University of Science and Technology (IUST), Tehran,1684613114, Iran, hkorayem@iust.ac.ir, S. Rafee Nekoo| Professor, PhD Student, Robotic Research Laboratory, School of Mechanical Engineering, Iran University of Science and Technology (IUST), Tehran,1684613114, Iran, F. Abdollahi| MSc Student, Department of Engineering, Science and Research Branch, Islamic Azad University Tehran, Iran
Keywords
Related Articles
- EP ID EP5589
- DOI -
- Views 322
- Downloads 14
Determination of Flood Plain Zoning in Zarigol River Using the Hydraulic Model of HEC-RAS
Several methods have been presented to flood administration and reduction and the results of flood risks until now. One of the employed methods is the Flood Plain Zoning (FPZ) method using hydraulic analysis that is base...
Investigation of mineralogical properties of soils developed on pyroclastic deposits; A case study from Karaj region, Iran
The study of soils derived from volcanic products because their large extent and unique characteristics are very important and can help us in the management and identification capabilities of them.
A Study on the Anesthetization of Persian Sturgeon (Acipenser persicus) Fingerlings in three weight groups; using Clove (Eugenia caryophyllata) oil
To evaluate the effects of different concentrations and exposure time of clove (Eugenia caryophyllata) oil on the anesthesia and recovery stages of Persian sturgeon (Acipenser persicus) fingerlings, three weight groups i...
New approach clustering algorithm for customer segmentation in automobile retailer industry
This research presents a new method for automatic customer segmentation based on usage behavior, without using a human specialist. In addition, the research focuses on profiling customers and finding a relation between t...
Design of a Low - Power Switched - Capacitor Bandpass Filter in 0.18?m CMOS Technology with Quality Factor Tunability
In this paper, the design of low - power second - order switched – capacitor bandpass filter is presented in 0.18?m CMOS technology. Instead of two operational amplifiers in conventional structures only...