HAZARDS IDENTIFICATION AND RISK ASSESSMENT OF PHYSICAL AND MECHANICAL FACTORS OF FORKLIFT OPERATIONAL IN PT SINAR INDOGREEN KENCANA AAC PRODUCTION AREA’S
Journal Title: Journal of Vocational Health Studies - Year 2018, Vol 2, Issue 1
Abstract
Background: Forklift is one of the most used craning plane in the manufacture and logistics industry. The operational of forklift can cause fatality work accident. PT SIGK uses forklift in the daily production activities, so it is necessary to identify hazard and risk assessment. Purpose: This study was to identify and assess the risk of physical and mechanical hazard at every stage of forklift operation. Methods: The type of this research was descriptive observational research, the object of the study were potential hazard and risk of all forklift operation stages in the AAC production area, consisted of 4 stages which were initial inspections stage, operational preparation stage, operational stage and post operations stage. Results: The result showed that there were 25 hazards, which were 4 hazards at the initial inspections stage, 2 hazards at the operational preparations stage, 14 hazards at the operational stage and 5 hazards at the post operations stage. Initial risk assessment obtained 2 hazards with high risk level, 22 hazards with medium risk level and 1 hazard with low risk level. The most prevalent hazard controls performed by PT SIGK were administrative (SOP, for klift training, safety sign) and PPE (helmet, gloves, mask), the controls got the value of effectiveness between 50% to 75%. Residual risk assessment, obtained 5 hazards with medium risk level and 20 hazards with low risk level. Conclusion: Additional control should be done by the company to reduce the residual risk level of medium category to be low, if the control recommendation is implemented well then the overall level of residual risk with low category will be obtained.
Authors and Affiliations
Elya Maula Imro’atul Khasanah, Erwin Dyah Nawawinetu
Keywords
Related Articles
- EP ID EP594635
- DOI 10.20473/jvhs.V2.I1.2018.20-27
- Views 201
- Downloads 0
ANALYSIS OF MYCOPLASMA GALLISEPTICUM INFECTION FACTORS IN COMMERCIAL LAYER CHICKEN FARM USING ANALYTICAL HIERARCHY PROCESS
Background : Mycoplasma galliseptium (MG) is a pathogenic microbial often found in poultry farm industry. In Indonesia there are rarely data of MG research. There are some factors increased the risk of MG infection. Purp...
THE CORRELATION OF PERSONAL PROTECTIVE EQUIPMENT SOCIALIZATION TOWARD THE CHANGING OF OCCUPATIONAL SAFETY AND HEALTH BEHAVIOR OF MUSICAL INSTRUMENT CRAFTSMEN
Background: Cultural conditions K3 in the industry Small Medium Enterprises (SME) craftsmen of traditional musical instruments is low only use 2 personal protective equipment that is protective mask and gloves. The condi...
LAMELLAR BODY COUNT WITH CELL DYN EMERALD AND CELL DYN RUBY METHODS ON PRETERM BIRTH
Background: Lamellar bodies are produced by pneumocyte type II cells in the lung alveoli. Lamellar bodies are present in amniotic fluid in increasing quantities as gestation advances, 1 – 5 µm in size, similar in size to...
ANTI-INFLAMMATORY ACTIVITY OF BAWANG DAYAK (ELEUTHERINE BULBOSA (MILL. URB.))ETHANOL BULB EXTRACTS
Background: Inflammation is a normal process in response to injury, but causes problems for the patient, including the appearance of pain, swelling, or fever. Anti-inflammatory agents generally used for those conditions,...
VARIOUS LABIAL BOW MODIFICATION IN REMOVABLE ORTHODONTIC APPLIANCE
Background: In several dental malposition cases, removable orthodontic component modifications are needed in order to obtain maximum end result, and comfortable to use. One of the active components which can be modified...