Heat transfer in road pavement structure and identification of its layers thermal parameters
Journal Title: Civil and Environmental Engineering Reports - Year 2010, Vol 1, Issue 5
Abstract
Authors and Affiliations
P. Aliawdin, J. Połczyński
Keywords
Related Articles
- EP ID EP272949
- DOI -
- Views 76
- Downloads 0
THE LOAD-BEARING CAPACITY OF TIMBER-GLASS COMPOSITE I-BEAMS MADE WITH POLYURETHANE ADHESIVES
This article discusses the issue of composite timber-glass I-beams, which are an interesting alternative for load-bearing beams of ceilings and roofs. The reasoning behind the use of timber-glass I-beams is the combinati...
Methane production from fat-rich materials
Waste materials containing a lot of fats seem to be an attractive substrate for production of methane through the fermentation process. Yet, due to a changing content of reagents and the high concentration of higher fatt...
HYGIENE CONDITION OF WATER USE AND SANITATION FACILITIES AT URBAN SLUMS: ANALYSIS OF PORT CITY CHITTAGONG, BANGLADESH
Low income community development is the prerequisite for the overall development of a society. There are different kinds of parameters to widen community development, such as health, economic, social, a living pattern, e...
ASSESSMENT OF IMPACT OF THE RHEOLOGICAL PARAMETERS CHANGE ON SENSITIVITY OF THE ASPHALT STRAIN BASED ON THE TEST RESULTS
The creep test under the static loading, that allows to determine rheological properties of asphalt based on the creep curve, is the most effective test nowadays. Applied loads are non-destructive and allow to observe th...
Dewaterability of thermal conditioned sewage sludge after anaerobic stabilization
Thermal pretreatment of sewage sludge influences the improvement of biochemical decomposition of sludge in the anaerobic stabilization process. At the same time the ratio of fermentation impacts on the effectiveness of s...