How Does the Surface Topography of a Green Composite Affectits Printability?
Journal Title: Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi - Year 2019, Vol 2, Issue 2
Abstract
In this study, the effect of surface topography of luffa fiber reinforced green composite materials on its printability was investigated. For this purpose, bio-composite plates using luffa fiber as reinforcement and epoxy as the matrix were produced. Then, printing such as line and dot on the surfaces of these plates was carried out by the screen printing method. Before and after printing, the surface roughness values of the produced bio-composites were measured using 3D non-contact optical profilometer. Afterward, to validate these measurements and to check the printing quality, 3D Optical Profilometer was used to scan the surface roughness of bio-composite materials. According to the obtained results, the improvement of the composite surface topography is increase surface smoothness. With this result, it is clearly understood that the surface smoothness is the main parameter of printability for the resulting image clarity.
Authors and Affiliations
Garip GENÇ, Sinan SÖNMEZ, İhsan YÜCE
Keywords
Related Articles
- EP ID EP581368
- DOI -
- Views 85
- Downloads 0
Sanayi Üretimde Elektrikle İlgili Yaşanan İş Kazalarının Belirlenmesi ve Çözüm Önerileri
Determination of work-related accidents in industrial production regarding electricity experienced and their solutions. The need for manpower has replaced with mechanization since the industrial revolution. Electrical en...
Solid And Biological Wastes Production Of Electricity
In recent years, the population of our country has increased significantly. Following this rise, both the shelter and the energy needs of the factories have seen a big rise. In our country where energy requirements are m...
Comparison of flexural properties of luffa and jute fibers
In this study, the mechanical properties of bio-composite materials produced by using plant-based fibers compared. Luffa fiber and jute were used as reinforcement in the production of these biocomposite samples. To able...
Determination of the Mechanical Properties of Gas Metal Arc Welded Armox Steels
Armox protection plate is traditionally used for military applications, and in today's world it is also used for civil applications. Armox has excellent ballistic properties in combination with high hardness and strength...
Changes in Mechanical and Morphological Properties of AISI 420 Stainless Steels Welded with M42 Steel Wire Associated with Weld Cooling Medium
In this study, the method AISI 420 TIG welding of martensitic stainless steels in the protected environment of Ar gas and 75 amps and with a weld speed of 4.5cm/min was carried out using M42 steel wire. For this purpose,...