حذف و بازيابي کادميم از محلول‌هاي آبي به‌وسيله نانوساختار کنوکارپوس

Journal Title: آب و فاضلاب - Year 2018, Vol 29, Issue 2

Abstract

Cadmium Removal and Recovery from Aqueous Solution Using Conocarpus Nanostructure Heavy metals are recognized as one of the most toxic groups. They enter the food chain through the waste disposal into the water and environment. This study was carried out with the aim of investigating cadmium ions removal from aqueous solution using conocarpus nanostructure. For this purpose, conocarpus was grinded to nano-size by the ball mill. The effect of experimental parameters such as pH, time, adsorbent dosage and initial concentration of cadmium were studied in batch system. The PSA, FTIR and SEM tests were used to determine the absorbent characteristics. The imaging of adsorbent indicated that surface of conocarpus had many deep pores, which represents the better adsorption of cadmium. 8.5% of adsorbent particles were in the range of nanoparticles and 91.5% of them were in the range of nanostructure. The results showed that optimum pH for cadmium adsorption is 6 and the maximum removal efficiency and adsorption capacity of cadmium are 80.9% and 0.86 mg/g., respectively. Comparing the adsorption isotherm and kinetics models showed that the Langmuir and Ho models, with R2 values of 0.998 and 0.990 respectively, had a better fitting and description of adsorption data than other models. The study showed that conocarpus nanostructure is an effective adsorbent for cadmium removal from aqueous solution. .

Authors and Affiliations

Pejman pourmohammad, Masumeh Farasati, Bahman Farhadi, Meghdad Pirsaheb

Keywords

Related Articles

ارائه يک مدل خودشويي براي کانال‌ها با مقطع ذوزنقه A Self-Cleansing Model for Trapezoidal Channels

A Self-Cleansing Model for Trapezoidal Channels Investigation of channel capability for sediment transport is an important factor in sanitary sewer and urban runoff drainage system design. This is because of the undesir...

توسعه مدل‌هاي خطي کمينه كردن مصرف آب و توليد پساب در صنعت فراوري مس، مطالعه موردي: مجتمع مس خاتون‌آباد

Developing Linear Models to Minimize Water Consumption and Effluent Generation in Copper Industries (Case Study: Khatoon Abad Copper Refinery Plant) The effluent from copper industries is important in terms of productio...

مدل‌سازي نوع توزيع‌ جريان ورودي بر رفتار هيدروليکي داخلي سامانه تالاب مصنوعي زيرسطحي افقي Modeling of the Effect of Inflow Distribution on Internal Hydraulic Behavior of Horizontal Subsurface Flow Constructed Wetland

Abstract Treatment capability of a constructed wetland is heavily dependent on the uniformity of flow moving inside the wetland. This modeling study was performed to evaluate the effect of flow distribution on internal...

بهره‌برداری بهینه از شبکه‌های توزیع آب شهری تحت شرایط کمبود به‌روش تأمین نوبتی

Optimal Intermittent Operation of Water Distribution Networks under Water Shortage Under water shortage conditions, it is necessary to exercise water consumption management practices in water distribution networks (WD...

Download PDF file
  • EP ID EP333604
  • DOI 10.22093/wwj.2017.63218.2258
  • Views 81
  • Downloads 0

How To Cite

Pejman pourmohammad, Masumeh Farasati, Bahman Farhadi, Meghdad Pirsaheb (2018). حذف و بازيابي کادميم از محلول‌هاي آبي به‌وسيله نانوساختار کنوکارپوس. آب و فاضلاب, 29(2), 12-22. https://europub.co.uk/articles/-A-333604