توسعه مدلهاي خطي کمينه كردن مصرف آب و توليد پساب در صنعت فراوري مس، مطالعه موردي: مجتمع مس خاتونآباد
Journal Title: آب و فاضلاب - Year 2018, Vol 29, Issue 1
Abstract
Developing Linear Models to Minimize Water Consumption and Effluent Generation in Copper Industries (Case Study: Khatoon Abad Copper Refinery Plant) The effluent from copper industries is important in terms of production volume, environmental pollution and cost of treatment and disposal. In addition to its economic reasons, the effluent recovery also reduces the pollutant load. Such cases therefore prove the necessity of investigating different methods for reducing water consumption and effluent generation. This study investigated the minimization of water consumption and effluent production in Khatoon Abad copper refinery plant. For this purpose, the conventional method of reducing water consumption and a new technology called water Pinch were explained. The water Pinch technology was examined for three pollutant parameters (TSS, TDS and turbidity) in three high consumption units of Khatoon Abad copper refinery plant. For TSS, TDS and turbidity as pollutant parameters, total 614, 525 and 451 cubic meters of raw water consumption per day equivalent to 40.96, 35 and 30 percent could be saved, respectively. According to the results, the Pinch technology could help researchers to make decisions for reducing water consumption and according to the observations, suspended solids are regarded as the basis for reducing water consumption. Minimization of water consumption. .
Authors and Affiliations
Amir khakpour, Naser Mehrdadi, Ali Torabian, Farshad Golbabaei Kootenaei
مشخصهيابي فيزيکي و شيميايي رسوب چربي و روغن موجود در خطوط فاضلاب شهر مشهد و راههاي جلوگيري از آن
Physical and Chemical Characterization of Fat and Oil Deposits in Mashhad City Sewer Lines and the Solutions Developed Formation of oil, fat, and grease deposits in sewer pipelines is a major concern as they result in se...
Numerical Analysis of Transmembrane Pressure Changes in UF Systems by Changing the Geometry of the Inner Surface of Hollow Fiber بررسي عددي تغييرات فشار انتقال غشايي در سيستمهاي اولترافيلتراسيون با تغيير در هندسه سطح داخلي الياف توخالي
Abstract Membrane processes are one of the most important separation methods in water and wastewater treatment processes. Hollow fiber membranes are used in many separation processes due to their high surface area to vo...
کارايي راکتورهاي کرمي در کاهش حجم لجن توليدي در سيستمهاي لجن فعال
Efficiency of Worm Reactors in Reducing Sludge Volume in Activated Sludge Systems The activated sludge process is the most widely used on a global scale for the biological treatment of both domestic and industrial efflue...
اندازهگيري نيترات در محيطهاي آبي به وسيله نانو حسگر الکتروشيميايي ساخته شده بر پايه کامپوزيت گرافن اکسايد/ نانوسلولز- نانوذرات نقره Measurement of Nitrate Concentration in Aqueous Media Using an Electrochemical Nanosensor Based on Silver Nanoparticles-Nanocellulose/Graphene Oxide
Measurement of Nitrate Concentration in Aqueous Media Using an Electrochemical Nanosensor Based on Silver Nanoparticles-Nanocellulose/Graphene Oxide M. Shadfar1, R. Mohmmadali Tehrani2, F. Hooshyar1 1. MSc in Analytica...
بررسي خاک اره اصلاح شده با دياتيلنتريآمين بهعنوان يک جاذب مؤثر براي حذف آهن (III) از نمونههاي آبي
Evaluation of the Sawdust Modified with Diethylenetriamine as an Effective Adsorbent for Fe (III) Removal from Water Heavy metals are environmental pollutants that nowadays a lot of efforts are made to remove them. In t...