Hydraulic Electronic Unit Injector (HEUI) Testing Bench
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
This paper presents a suggested injector test bench construction, and also testing of its performance and application, because there is no device for testing the workability for this kind of injectors. Also, service dealers in Jordan and Middle East replace all injectors of any equipment, equipped with this kind of injectors when an overhaul for the engine is needed, which means at least eight injectors are replaced even if not all of them are not working properly. So, this bench will save a lot of money if the properly working injectors are not replaced; knowing that each single injector costs around $1900. When testing the injector, it could be known from the problem existed after analysis, the type of maintenance needed for this injector.
Authors and Affiliations
Mohannad O. Rawashdeh
Keywords
Related Articles
- EP ID EP655793
- DOI 10.24247/ijmperdaug201956
- Views 87
- Downloads 0
Energy and Exergy Analysis of Diesel Engine Run on Different Second Generation Biodiesels
The present work focuses on experimenting the functional efficacy of coconut biodiesel (CB), palm biodiesel (PB) and sunflower biodiesel (SB) transesterified from waste and fried cooking oils in a compression ignition en...
A Cost-Effective Technique to Avoid Communication and Computation Overhead in Vehicle Insurance Database for Online Record Monitoring
The study focuses on the information from heterogeneous data sources in online vehicle insurance record linkage. It resolves several types of heterogeneity problems that arise, when the same real-world entity type is rep...
Study of Raw Materials with the Aim of Obtaining Ceramic Filler and Heat- Insulating and Structural Wall Ceramics
The article presents the results of a comprehensive study of the chemical and mineralogical composition and the physical and mechanical properties of raw materials in the form of granulated blast furnace slag used at the...
Wear Analysis by Taguchi Technique of Al6061 Based Hybrid Composite Reinforced with Sic and Al2o3
In this paper, wear characteristics of hybrid composite of Al6061 was studied. Hybrid composite was reinforced with silicon carbide (SiC) with varying (3%, 6%, 9%) weight % and keeping the alumina (Al2O3) with constant (...
Analysis of Tube Failure in Economizer and Super Heater Tube in Thermal Power Station
Boiler tube failure continues to be the leading cause for forced outages in fossil fired boiler. The tube failure may be a simple problem, unless it causes damage to the power plant and affects safety of the human being....