Wear Analysis by Taguchi Technique of Al6061 Based Hybrid Composite Reinforced with Sic and Al2o3
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 4
Abstract
In this paper, wear characteristics of hybrid composite of Al6061 was studied. Hybrid composite was reinforced with silicon carbide (SiC) with varying (3%, 6%, 9%) weight % and keeping the alumina (Al2O3) with constant (10) weight percentage. Stir casting method was used to fabricate the composite. T6 heat treatment was applied on the sample before doing the wear test. Pin on disc apparatus was used to perform the wear test. SEM was performed to do the microstructural analysis. It was found that hardness and density of samples increased as the percentage of SiC increases. L9 orthogonal array was applied to check the interaction between different wear parameters using the Taguchi technique.
Authors and Affiliations
Aparmit Shivam, Amit Singla
Keywords
Related Articles
- EP ID EP240666
- DOI -
- Views 98
- Downloads 0
Experimental Analysis of Friction Stir Welding of Dissimilar Alloys AA7075 and MG ZE42 Using Butt Joint Geometry
The Aluminium alloy 7075 and Magnesium alloy ZE42 plates of 6 mm thickness are welded in the circular butt joint division by friction stir welding (FSW) process, utilizing vertical processing machine. Method parameters,...
Stress Analysis on Commercial Aircraft Window Bleed (Tiny) Hole
The paper deals with the stresses and stress concentration phenomenon around the window bleed hole of Airbus A380 aircraft. The Analytical solution of the stress concentrations is determined at different conditions using...
Optimization of Design Parameters of Bellows Expansion Joints
A technique for optimizing the design parameters of the metal corrugated shell of bellows expansion joints is proposed. The purpose of the development is to improve the accuracy of resource assignment, as well as further...
Application of Link Adjacency Values on Six Link Planar Mechanisms for Identification of Isomorphism
In present days, researchers deal with a problem to identify the isomorphism in structural synthesis among the kinematic chains (KC). In recent times, a new method was proposed named as Link adjacency values. In this met...
AN EFFECT OF MAGNETIC PARAMETER ON MHD BOUNDARY LAYER MODEL FOR NEWTONIAN POWER-LAW FLUIDS USING COLLOCATION METHOD
In the present paper, the equation of Magneto hydrodynamic boundary layer model for Newtonian power law fluid has been analyzed in the presence of transverse magnetic field for two cases, (i) when plate is stationary (ii...