Identification of numerical model parameters of tunnel lining in non-cohesive soil
Journal Title: Bulletin of the Military University of Technology - Year 2018, Vol 67, Issue 4
Abstract
The paper discusses identification of numeric model parameters of tunnel lining in a soil medium according to the discrete element method. An author’s program based on the discrete element method was used. Laboratory tests were conducted to determine the computer model parameters defining the lining and the soil medium. The numerical model was calibrated by comparing the lining deformations occurring in the laboratory test and in the numeric simulation. Tunnel lining displacement during laboratory tests was determined using digital photography. Keywords: civil engineering, discrete element method, cylindrical tunnel lining<br/><br/>
Authors and Affiliations
Paweł Szklennik
Effects of Portland cement addition on Young’s modulus of geopolymer concrete cured at ambient conditions
This paper presents the results of Young’s modulus and Poisson’s ratio tests conducted on samples made of low-calcium fly ash-based geopolymer concrete samples and on samples with a 10% addition of Portland cement, cured...
Analiza falowa tarczy w płaskim stanie naprężenia metodą ruchomych, najmniejszych kwadratów
W pracy rozwiązano zadanie początkowo-brzegowe propagacji płaskiej fali naprężenia w tarczy stalowej metodą ruchomych najmniejszych kwadratów. Stosowano różne siatki węzłów. W przypadku siatek z węzłami generowanymi loso...
Examination of smooth surfaces roughness using angle scatterometer. Part 2. The experimental procedure. The measurement results of chosen surfaces
The experimental procedure for measurements of smooth surface roughness parameters using automated angle scatterometer, built at the Institute of Optoelectronics (IOE), is described. The results of measurements and thei...
Badanie chropowatości powierzchni gładkich za pomocą skaterometru kątowego. Cz. 2. Metodyka pomiaru. Wyniki pomiarowe wybranych powierzchni
W artykule opisano metodykę pomiaru parametrów chropowatości powierzchni za pomocą zbudowanego w IOE WAT zautomatyzowanego skaterometru kątowego. Zaprezentowano wyniki pomiarowe dla trzech wybranych polerowanych powierzc...
Wyznaczanie normalnych charakterystyk podatnościowych styku powierzchni o określonej strukturze geometrycznej
W pracy przedstawiono sposób wyznaczania normalnej charakterystyki podatnościowej styku między elementami łączonymi w połączeniu wielośrubowym. Badania wykonano przy użyciu ekwiwalentnych próbek zastępujących elementy łą...