Identification of parameters of dipole model of the led radiation source
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 85, Issue 1
Abstract
The results of identification of the parameters of a mathematical model of the radiation source LED are given. For the mathematical modeling abstract physical object is used – dipole and assumptions that diagram radiation of LED is created both by the system of electric dipoles and by the optical system LED. Vectors of electrical strength of dipoles are defined for modeling of low-radiation energy transfer through layered biological media. Mathematical model finds further use in automation to achieve optimal exposure surface of biological objects in layered biological media. The results are used in the research of biological objects stimulation with light intensity below the standard level in the prevention, rehabilitation and medical diagnostics. The decreasing of invasiveness of biological objects, increasing the resolution of assessment of their reaction as well as possibilities for automation of researches have been received.
Authors and Affiliations
Mykhailo Bachynskyy, Yuriy Stoyanov, Bohdan Yavorskyy
Keywords
Related Articles
- EP ID EP257696
- DOI -
- Views 48
- Downloads 0
Influence of threshing drum's disbalance in combine harvester on its vibration
In this paper research of threshing drum’s disbalance in combine harvester is presented. Modern threshing drum of tangential type in combine harvester are made open. Central and extreme disks are mounted on the cylinder...
Analysis of stress intensity factors obtained with the fem for surface semielliptical cracks in the zones of structural stress concentrators
In the given article the analysis of stress intensity factors (SIF) for semielliptical surface cracks in low-alloy steel using the finite element method was conducted. The results of the distribution of stress intensity...
Biaxial tension of a plate with a Griffiths crack
According to the elastic approach the biaxial loading problem of the plane with an elliptical defect was solved. Using the obtained solution and the deformation approach [1, 3] the solution for the cracked plane under th...
Phototherapy device with determination of absorbed energy dose
The article deals with comprehensive analysis of the most common design of devices being used for human skin irradiation in phototherapy. The authors determined that their main drawback is the lack of the possibility of...
Longitudinal - angular oscillation of wheeled vehicles with non-linear power characteristics of absorber system
An in parameterized form of analytical dependences that describe the parameters defining a longitudinally - angular oscillation of the sprung wheeled vehicles. It is shown that for wheeled vehicles for special purposes f...