IMAGE-BASED ANALYSIS OF WEAR STATE OF CERAMIC NITRIDE CUTTING TOOLS AFTER MACHINING OF NODULAR CAST IRON
Journal Title: Tribologia - Year 2011, Vol 236, Issue 2
Abstract
This paper presents the results of the wear of nitride ceramic tools, uncoated and coated with CVD-Al2O3/TiN layer, in the machining of pearlitic-ferritic nodular cast iron-EN-GJS-500 grade. Investigations include the tool wear curves and appropriate tool lives, as well as detailed identification of tool wear mechanisms occurring on both the rake and flank faces of the tools. The occurrence of various wear mechanisms depend on the machining conditions, e.g. abrasive wear, diffusive wear and chemical wear (chemical dissolution). Higher wear resistance of coated nitride tools with an additional oxide ceramic layer was confirmed. In particular, such techniques as SEM, BSE and EDX analysis were employed to analyse tool wear.<br/><br/>
Authors and Affiliations
Joanna Małecka, Wit Grzesik, Damian Kowalczyk, Piotr Kiszka
Keywords
Related Articles
- EP ID EP271781
- DOI -
- Views 48
- Downloads 0
ANALYSIS OF WEAR SCAR SURFACES AFTER RUBBING TEST WITH LUBRICANTS CONTAINING ADHESION ADDITIVE
The paper presents the results of the environmental impact study of an adhesive additive, dissolved in the mineral, vegetable, and synthetic oils, on the change of the composition of the surface layer of the wear scar af...
COEFFICIENT OF RESTITUTION OF PARTICLE VELOCITY DURING COLLISION WITH A ROTOR MILL BLADE
In the paper, the authors proposed to measure influence of real conditions on the restitution of velocity k by using coefficient β as υ’’ = υ’k/β. The conditions are as follows: the particle is not spherical and the flow...
THE SELECTION OF PRELOAD IN ANGULAR CONTACT BALL BEARINGS ACCORDING TO THE DURABILITY CRITERION
The regulation of the preload of angular contact ball bearings is mentioned in specialist literature, but only as a practical activity carried out based on experience, still without selection methodology. At present, the...
Wpływ obwodowego rowka na czopie na przepływ oleju w poprzecznym łożysku ślizgowym
Wpływ napełniacza metalicznego na proces sieciowania kompozytów epoksydowych oraz kształtowanie ich właściwości tribologicznych
W artykule przedstawiono wyniki badań tribologicznych kompozytów chemoutwardzalnych o różnych składach jakościowych. Osnową polimerową kompozytów była żywica epoksydowa Epidian 5. Jako napełniacze kompozytów zastosowano...