Impact and Particle Buffered Vibration Absorbers Optimization and Design
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2015, Vol 1, Issue 2
Abstract
Passive, broadband targeted energy transfer refers to the one-way directed transfer of energy from a primary subsystem to a nonlinear attachment; this phenomenon is realized in damped, coupled, essentially nonlinear impact or particle dynamic vibration absorber (DVA). An impact damper is a passive control device which takes the form of a freely moving mass, constrained by stops attached to the structure under control, i.e. the primary structure. The damping results from the exchange of momentum during impacts between the mass and the stops as the structure vibrates. A particle-based damping system can overcome some limitations of ordinary DVA by using particles as the damping medium and inter- particle interaction as the damping mechanism. Large damping at such family constructions of DVA’s does not bring to destruction an elastic DVA element over in critical cases, when working frequency approaches own frequency of DVA, or when the transitional process of acceleration of rotating machines is slow enough and DVA’s has time to collect large amplitudes of vibrations. The primary structure is modelled as a spring-mass system. In this paper, an efficient numerical approach based on the theoretical-experimental method is proposed to maximize the minimal damping of modes in a prescribed frequency range for general viscous tuned-mass systems. Methods of decomposition and numerical synthesis are considered on the basis of the adaptive schemes. The influence of dynamic vibration absorbers and basic design elastic and damping properties is under discussion. A technique is developed to give the optimal DVA’s for the elimination of excessive vibration in sinusoidal forced rotating system. It is found that the buffered impact damper not only significantly reduces the accelerations, contact force and the associated noise generated by a collision but also enhances the level of vibration control. The interaction of DVA’s and basic design elastic and damping properties is under discussion. One task of this work is to analyze parameters identification of the dynamic vibration absorber and the basic structure. The discrete-continue models of machines dynamics of such rotating machines as water pump with the attachment of particle DVA’s and elongated element with multi mass impact DVA’s are offered. A technique is developed to give the optimal DVA’s for the elimination of excessive vibration in harmonic stochastic and impact loaded systems.
Authors and Affiliations
Bohdan Diveyev
Substantiation of the Process of Vertical Transportation of Piece Loads
The urgent problem of automatization of the process of products transportation with a help of vertical chutes under the influence of gravitational forces using elastic elements is considered. The interaction between the...
Heat generation and heat consumption in engine of rapid internal combustion
The research of heat generation and heat consumption in a conventional or ideal engine provides useful information about the regularities, character of the process and effectiveness of fuel combustion in any real engine...
Influence of the Technological Gap Value of the Tool-Joint Tapered Thread on the Drilling Mud Flow Rate in Its Screw Coupling
Tightness is one of the parameters of the quality of pipe drill string. Consequently, the reduction of hydraulic costs and wear of the tool-joint tapered thread of the drill string can be achieved by changing the cutting...
Cylindrical control of holes of tube details manufactured by deforming broaching
This work is devoted to the issues of processing holes in different thickness of tubular billets great length deforming broaching. The urgency of this problem is substantiated. The results of studying the regularities of...
The Hydro-Automatic Damping System against Dynamic Vibrations
A review and analysis of the developed hydraulic system for quenching dynamic oscillations has been carried out. A mathematical model for determining the operation delay time of the hydraulic system of the dynamic quench...