IMPACT OF TECHNOLOGICAL ASPECTS OF PRODUCTION OF FIBROUS COMPOSITE MATERIALS WITH INJECTING RESIN UNDER PRESSURE INSIDE THE FORMS

Apply

IMPACT OF TECHNOLOGICAL ASPECTS OF PRODUCTION OF FIBROUS COMPOSITE MATERIALS WITH INJECTING RESIN UNDER PRESSURE INSIDE THE FORMS

Journal Title: Prace Instytutu Lotnictwa - Year 2016, Vol 244, Issue 3

Abstract

The paper discusses and attempts to analyze the impact of technological methods of forming fibrous composite materials (FCM) epoxy matrix (LH 289) on the quality of the obtained laminates with different participation and the type of reinforcement. Presented aspects and the differences in production methods FCM injection of resin under pressure into the mold cavity for example, the infusion methods and vacuum bag. In this paper for estimating parameters (τ lok., σmax) defining the strength FCM model was used weakest micro volume based on ineffective (critical - Lkr) the length of the gain. The model assumes that the three layer composite consists of components having an individual physico -mechanical properties. It was found that the destruction of hybrid composites done by decapitation and the boundary interface of the resin layer between two layers of carbon biaxal (with an angle of ± 45 ° fiber orientation), which was a layer of glass fabric. The model calculation provides the unified position, a tool for coordinated description of strength. It is shown that the model gives relatively good results.<br/><br/>

Authors and Affiliations

Rafał Chatys, Krzysztof Szafran

Keywords

Research institutes and scientific-industrial centres in the context of innovative economy in light of experiences of the Institute of Innovative Technologies EMAG

The main tasks of the leading scientific centres in Poland, that is, universities, scientific institutes of the Polish Academy of Sciences and research institutes are discussed. On the example of the Institute of Innovat...

EP ID EP186112
DOI 10.5604/05096669.1222737
Views 32
Downloads 0