Implementation of AES Algorithm and Improve Throughput
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 2
Abstract
Now a days VLSI application speed and area reduction is very important one. In this paper implemented AES algorithm.AES represents an algorithm for advance encryption standard of different operation required in the steps of encryption and decryption. The proposed architecture is based on optimizing area in terms of reducing and improve throughput for design of AES algorithm in VHDL .this paper presents AES-128 bit algorithm design consist of 128 bit symmetric key and XILINX ISE 14.1 project used for synthesis and simulation of this proposed design.
Authors and Affiliations
T. Sivaprakasam , Dr. M. Ramasamy, M. Kuralarasan
Temperature Sensor Using SCADA
Automatic temperature control is first step in applications such as industries. The main aim of temperature sensor using SCADA is to sense the temperature and perform the required performance using temperature sensors....
Study Soil Pollution Spectrum In and Around Industrial Areas of District Shahdol (M.P.) India
Soil pollution is the contamination of soil with harmful substances that can adversely affect the quality of the soil and the health of those living on it. Pollution can be the result of an accident or carelessness, or...
DC Electrical Properties of Antimony Substituted Lithium Ferrites
This paper discusses the DC electrical properties of antimony substituted lithium ferrites with compositional formula [Li0.5+x SbxFe2.5-2x O4]; where x=0.0 to 1.0 insteps of 0.1 prepared by conventional standard ceramic...
Design and Analysis of a Camshaft by using 3D Printing Technology
Normally the cam shaft found over the piston cylinder and its rotate about that axis across connected to the timing chain. It can be functioned of opening and closing of inlet and outlet valve of the engine. In our proj...
Performance Prediction of a Gas Turbine Operating on Air Using 3D CFD
In this paper the work is to demonstrate the performance of single stage gas turbine which is able to operate with hot air as a working fluid at specific boundary conditions. These boundary conditions were chosen to be...