Implementation of Head and Finger Movement Based Automatic Wheel Chair

Abstract

An automated system is to be developed to control the motor rotation of wheel chair based on head and finger movement of physically challenged person. In order to facilitate these people for their independent movement, an accelerometer device is fitted on persons head and a flex sensor is fixed in a glove which is to be wear by the person. Based on the head and finger movements the accelerometer and the flex sensor will drive the motor fitted to the wheel chair. The wheel chair can be driven in any of the four directions. The automated wheelchair is based on simple electronic control system and the mechanical arrangement that is controlled by a Programmable Interface Controller. This automatic wheel chair also helps people who have various other disabilities to sit on the chair and just hold the accelerometer and move it over to control the vehicle movements. In this paper the wheel chair has been mimicked using a robot.

Authors and Affiliations

Tameemsultana S, Kali Saranya N

Keywords

Related Articles

Automated Switching Solar Power Grid Tie Inverter Using Embedded System

In this system solar power source is used to reduce the power source from the grid and this process mainly focused on switching power from one source to another during the time of low voltage from the solar power system....

Analysis of Circuit Breaker and Relays in Substations

There is a necessity of circuit breaker replacement with Gas circuit breaker is to meet the day by day growing load demand, to reduce the down time to upgrade the system with current technology and to provide better prot...

Optimum Monochromatic Wavelengths for Solar Panel Testing and Conversion of Parameters to STC 

Solar panels are one of the simplest devices to produce electricity from the sun. Even though the efficiency with which it harnesses energy from the sun is very less, its affordability and ease of use makes it a strong c...

A Grid Connected Three-Port Solar Micro Inverter 

In the present scenario of increasing energy crisis Interest in ac module strategy for PV based microinverter has grown in recent years because of its improved energy harvest, improved system efficiency, lower installati...

One of Two Conductors in Capacitor Substitute by Mercury 

Each capacitor generally consists of two conductors separated by a non-conductive region, however a great changed happened in the modern capacitors but the principle has been remained the same as the first day designed....

Download PDF file
  • EP ID EP125357
  • DOI 10.9756/BIJPSIC.1010
  • Views 118
  • Downloads 0

How To Cite

Tameemsultana S, Kali Saranya N (2012). Implementation of Head and Finger Movement Based Automatic Wheel Chair. Bonfring International Journal of Power Systems and Integrated Circuits, 1(1), 48-51. https://europub.co.uk/articles/-A-125357