Improved Response Performance of Two-Phase Hybrid Stepping Motor Control Using PID Tuned Outer and Inner Loop Compensators
Journal Title: Журнал інженерних наук - Year 2019, Vol 6, Issue 1
Abstract
This paper has presented improved response performance of two-phase hybrid stepping motor control using proportional integral and derivative (PID) tuned outer and inner loop compensators. It is desired to improve the response performance tracking of a two-phase hybrid stepper motor to achieved overshoot less than 5 %, settling time less than 0.16 s, and rise time less then 0.02 with 2 % criterion. To achieve the objective of the study, a dynamic model of a two-phase hybrid stepper motor was obtained in the form of a transfer function. A robust PID tuning technique was adopted using the single input single output (SISO) Graphic User Interface (GUI) of the design task of the Control and Estimation Tool Manager (CETM) of MATLAB software in designing the compensators. A single compensator was designed and added to control loop of a two-phase hybrid stepping motor to improve the response performance. Simulation was performed in MATLAB and an overshoot of 8 % with the single loop compensator. However, the overshoot of the system requires further improvement. A new control loop was proposed using twocompensator loop structure. The outer loop and inner loop compensators were designed and added to the two-phase hybrid stepper motor control. Simulation was performed in MATLAB and the result obtained showed that with the two-compensator loop structure, the overshoot was greatly reduced to 2.6 % with rise time of 12 ms and settling time 11 ms. This indicates that the response tracking performance of the system has been improved by the combined outer and inner loop compensators.
Authors and Affiliations
E. B. Onyeka, M. Chidiebere, A. P. Nkiruka
Keywords
Related Articles
- EP ID EP627733
- DOI 10.21272/jes.2019.6(1).d1
- Views 133
- Downloads 0
Diamond Grinding the Ceramic Balls from Silicon Carbide
The influence of the machining regime was experimentally investigated on the output indexes of the diamond grinding the ceramic balls from silicon carbide, such as the rate of the material removal and the rate of changin...
Directions of the environmental protection processes optimization at heat power engineering enterprises
The article observes the impact factors of heat power engineering enterprises on the environment and ways of anthropogenic impact reduction during the application of ecological security control technological methods. The...
Selection of the Optimal Software for Designing Expert Systems
This article deals with the problems of information processing, searching and finding the solutions in the related fields of scientific knowledge. One of the solutions to this kind of problem is the software like expert...
Alternative technology to manufacture bimetallic products by using self-propagating high temperature synthesis
Electric welding is usually used for surfacing metal products. This process may be laborious and timeconsuming, which at the same time excludes welding jointing throughout the product surface. The productivity of powder...
Measuring of roundness after turning of composite material with natural fibers
The article is based on practical requirements from the reason of unequally removed material during the turning of the wood plastic composite (WPC). This results in geometrical deviations of the WPC bar diameter. WPC rep...