Improvement in Wear Properties of a Hypereutectic Aluminium Silicon Alloy with Manganese 

Abstract

Improvement in wear properties of rare earth Cerium base hypereutectic Aluminium-Silicon alloy with Manganese modification has been reported in this paper. Wear studies were carried out on cast samples of hypereutectic Aluminium-Silicon alloy (Al-Si) with rare earth Cerium oxide (CeO2) and Manganese (Mn) modification. Final wear properties of rare earth Cerium oxide and Manganese modified hypereutectic Aluminium Silicon alloy were compared with the values of author?s previous work on rare earth Cerium oxide modified hypereutectic Aluminium Silicon alloy and hypereutectic Aluminium Silicon base alloy. Rare earth Cerium oxide and Manganese modification in hypereutectic Aluminium Silicon base alloy reduced the wear rates as compared to rare earth Cerium oxide modified hypereutectic Aluminium Silicon alloy and hypereutectic Aluminium Silicon base alloy. A comparison of wear rates at same velocity, load and sliding distance was made between above three different conditions and it was observed that rare earth Cerium oxide and Manganese modified alloy performed with least wear rates. Wear rates for rare earth Cerium oxide and Manganese modified hypereutectic Aluminium Silicon alloy was 6.36 times lesser than wear rate of hypereutectic Aluminium Silicon base alloy and was 2.97 times lesser than rare earth Cerium oxide modified hypereutectic Aluminium Silicon alloy. Wear rates were also calculated for rare earth Cerium oxide and Manganese modified hypereutectic Aluminium Silicon alloy at various velocities ranging from 0.2 m/s to 1.0 m/s at an equal interval of 0.2 m/s. It was noticed that minimum wear occurred at 1.0 m/s velocity and maximum at 0.2 m/s velocity. Further, scanning electron micrographs (SEM) of worn surfaces and wear debris of rare earth Cerium oxide and Manganese modified hypereutectic Aluminium Silicon alloy were compared at low velocity (0.2 m/s) and high velocity (1.0m/s) conditions at constant load (30 N) and sliding distance (500 m). It was observed that worn surface and wear debris of rare earth Cerium oxide and Manganese modified hypereutectic Aluminium Silicon alloy, showed mild oxidative wear irrespective of lower velocity. 

Authors and Affiliations

Prabhkiran Kaur , D. K. Dwivedi , P. M. Pathak , Sunil Kumar

Keywords

Related Articles

A Study on Static and Dynamic Behavior of Outrigger Structural System for Tall Buildings

In the present paper an investigation has been performed to examine the behavior of various alternative 3D models using ETABS software for reinforced concrete structure with central core wall with outrigger and without o...

A Study on Investment Preference and behaviour of Individual Investors in Coimbatore City 

This paper aims to find the behaviour of individual investors of Coimbatore city vis-a-vis available investment avenues in the Indian financial markets. The major factors behind an investment are the safety of principal...

Interaction Analysis of MAT Foundation and Space Frame for the Non Linear Behaviour of the Soil

Structural analysis is one of the most important aspects in structural design, since it gives an idea about the performance of the structure under load. Right from the beginning when the process of development started in...

Impact of Mobile Shopping Behaviour: Implications for Designing Mobile Marketing Strategy

Mobile commerce, by the end of 2017, will be 24.4% of overall Ecommerce revenues. Mobile app stores have emerged as vital part of Mcommerce. It is projected to grow to $76.5 billion in 2017 according to a survey from Sta...

Enhancement of Turbulent Heat Transfer Using Copper Twisted Tape

Augmentation of turbulent flow heat transfer in a horizontal tube by means of twisted tape inserts with air as the working fluid. In order to reduce excessive pressure drops associated with full width twisted tape insert...

Download PDF file
  • EP ID EP147866
  • DOI 10.9756/BIJIEMS.6043
  • Views 111
  • Downloads 0

How To Cite

Prabhkiran Kaur, D. K. Dwivedi, P. M. Pathak, Sunil Kumar (2014). Improvement in Wear Properties of a Hypereutectic Aluminium Silicon Alloy with Manganese . Bonfring International Journal of Industrial Engineering and Management Science, 4(3), 121-124. https://europub.co.uk/articles/-A-147866