Improvement of Photovoltaic Cells Efficiency by Reducing Contamination in Single Chamber PECVD System by Passivation with a-Si:H and μc-Si:H Thin Films
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 4
Abstract
High performance solar cells, deposited in a single chamber, can be obtained when low levels of contamination exists for the p-,i-,n- layers. This is a recurrent problem not only in the laboratories, but also in the industrial single chamber plasma enhanced chemical vapour deposition (PECVD) systems. In this paper an effective method of reducing the impurities, through the passivation with amorphous and nano/microcrystalline silicon thin film of the PECVD chamber walls, before and during the deposition of the solar cell layers is described.
Authors and Affiliations
Bogdan DIACONU, A. VICENTE, Viorica MUȘAT, R. MARTINS
Superplastic Behavior of 2024 Aluminum Alloy Sheet Subjected to Thermomechanical Processing
This paper describes the superplastic behavior of the commercial 2024 aluminum alloy. The investigated alloy was processed in a 3 mm thick sheet form. The superplastic properties of the alloy were investigated using an u...
The Evolution of the Characteristics of Mechanical Resistance for the Nitro-Carburrized Treated Steel, after Thermo-Magnetic Treatment
The aim of the research was to study the evolution of the characteristics of mechanical resistance for one type of steel. The material was subjected to the thermo-chemical (nitro-carburized treatment in plasma) treatment...
Estimation of the Metallurgical Industry Impact on the Environment
Objectively, the ecosystem in its development and working implies the accumulations on of some nonconcordances. Summing these disfunctions without taking into consideration their attenuation, may lead to producing, achie...
Possibilities to Study the Mixing State and Energy Dissipation in Metallurgical Reactors Using a System Based on Coloured Liquids
Coloured liquids are used to show the stream lines in aqueous systems used as model liquids, in different chemical reactors, also in metallurgical reactors dedicated to liquid steel processing; ladles represent a class w...
Integrated Analytical Study for the Somes Metalic Artefact Discoveri in Ibida Site, Romania
The paper presents the results of the analyses conducted using the SEM-EDX and micro-FTIR co-assisted techniques, on several metallic artefacts unearthed during the excavations at the (L)Ibida archaeological site in Slav...