Possibilities to Study the Mixing State and Energy Dissipation in Metallurgical Reactors Using a System Based on Coloured Liquids
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2005, Vol 28, Issue 1
Abstract
Coloured liquids are used to show the stream lines in aqueous systems used as model liquids, in different chemical reactors, also in metallurgical reactors dedicated to liquid steel processing; ladles represent a class where these principles could be succesful applied. A blue ink was selected as colouring agent because of the low price, good biological tolerability in contact with the human skin and absence of the necessity to treat the used evacuated water. As modeling liquid for stee was selected freshly distilled waterl. Mixing energy dissipation was measured at adequate scales using the transmittance and the absorbance of liquid sampleswith two laboratory spectrocolorimeters (KFK-2 Russia and Spekol-10 Carl Zeiss Jena, Germany). Volumic relative concentrations of the coloured liquids starting with 0,0005%vol. and even bellow are measured using this technique and the mentioned devices. Two model vessels, representing two types of metallurgical reactors, were usd in the present set of experiments. The experimental systems provide enough precise data because of using an adequate and accesible system of image recording and capture, based on a performant commercial web video camera.
Authors and Affiliations
Petre Stelian NIȚĂ, Adrian VASILIU, Vasile BAȘLIU
Keywords
Related Articles
- EP ID EP664766
- DOI -
- Views 102
- Downloads 0
Hydrogen Production by Steam Reforming of Renewable Raw Materials
The paper is based on study of steam reforming of renewable raw materials (bioethanol, biomethane) in stainless steel fixed bed reactor. The β-alumina catalysts with nickel has been synthesized and tested supported. The...
Fusible Models used to Casting Small Dimensions Sculptures
During the study regarding the obtaining of artworks using light fusible models it has been highlighted the possibility of dividing the process of castingmolding in simple, separate operations, whose execution becomes ac...
Phosphate Passivation Solutions Enhanced by Chemical Additives for Treatment of the Hot Dip Galvanized Steel
To stabilize the surface of the galvanized steel it is important to apply a passivation treatment during its manufacturing. The general aim of the passivation treatment is to prevent the formation “storage stain” or “whi...
Experimental Studies Regarding the Implementation Possibilities of a Quality Control System for Ceramic Products in Continuous Flux Production
In the current paper the authors studied the possibilities and limitations of a system intended to evaluate the quality of ceramic products directly on the production line. The system is based on a data mining specific a...
Measures to Optimize Job Security "Crane Machinists to Transport Liquid Steel"
The starting point in optimizing the prevention of occupational accidents and occupational diseases for a crane machinist for the transport of liquid steel is the risk assessment of the system. Risk assessment involves t...