Improving durability of the coated end mill when machining titanium alloys due to bedding
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2016, Vol 76, Issue 1
Abstract
The paper shows the results of the research of opportunities to increase the durability of the end coated mills when machining titanium alloys due to bedding. To this purpose the existing methods of improving the durability of tool materials are analyzed. It is noted that for the cemented carbide hardening before coating, the methods of surface hardening are widely used. In order to further improvement of tool durability by the example of milling alloy BT6 using carbide cutters, vibroabrasively machined before TiAlN coating. The possibility of further durability increase of the instrument due to bedding in «Promoledge 9 %» technological environment is examined. It was supplied to the cutting zone with minimum lubrication method. Bedding was carried out under the following conditions: Sz = 0,03 and Sz = 0,05 mm/tooth, t = 1 mm; V = 10 m/min., V = 15 m/min., V = 20 m/min., V = 25 m/min. The research shows that the recommended speed to further increase of the durability of end mills is V = 20 m/min. In this case, there is a durability increase when applying Sz = 0,03 mm / tooth to 1,5 times and at Sz = 0,05 mm / tooth – 2 times.
Authors and Affiliations
Yu. Y. Besarabets, B. N. Seredenko, E. R. Vaniiev
Keywords
Related Articles
- EP ID EP253413
- DOI -
- Views 159
- Downloads 0
Technological dispute for manufacturing population
New designs of technological equipment are presented – a variegated unit for adjusting the machine for precise manufacturing of a cut or on a tool of a tester, or on a workpiece, and also a design of a control device for...
Influence of Nonlinear Environmental Properties on the Process of Pulse-Stimulated Compulsory Combined Scattering under Femtosecond Pumping Conditions
Impulsive stimulated Raman scattering (ISRS) observed by pump-probe experiments was considered. The response from the model system for ISRS-process is calculated for femtosecond laser pump pulse. The response of the mode...
Determination of rational conditions of application of rock layered milling combines on iron ore pits
The method of determining the effective use of milling type surface miners for the use of non-blasting technology of layer milling of rocks during open exploration of iron ore deposits has been improved. The non-blasting...
Comparative analysis of time series forecasting models effectiveness by means of a multi-criteria procedure on the example of financial indicators
In the course of the research, a program complex was developed for forecasting time series using models of different classes and analysis of their effectiveness. Known time series models, such as neural networks, fuzzy l...
Materials selection for carbon nanotube composites in power transmission
Nowadays designers and producers implement non-metallic gears in power transmissions because of their better mechanical properties, like high elastic modulus, tensile strength and high wear resistance. In order to examin...