Improving strength and deformation characteristics of concrete-filled steel tubular elements in bending
Journal Title: International Science Journal of Engineering & Agriculture - Year 2022, Vol 1, Issue 5
Abstract
The article is devoted to the investigation of the type of monolithic reinforced concrete structures, known as Concrete-Filled Steel Tubular (CFST) elements. They are mostly used in compression and rarely in bending, due to their high deformability. However, there is still a trend in the development of CFST structures with both compressed and bent elements. While bending the reactive lateral pressure transmits from the steel tube to the concrete core creating a favorable condition - volumetric stresses in the concrete, which increases the flexural strength of the material significantly. Experimental studies have been carried out to determine the bearing capacity and deformability of steel-reinforced concrete (composite) structures filled with fiber-reinforced concrete (FRC) of different compositions. The optimal composition of the concrete core for CFST elements in bending was selected, it helped to increase the strength and deformation characteristics of the element. To choose this optimal composition of the concrete core among others, a series of specimens were prepared and tested in compression, tensile and bending tests, and together with that, the modulus of elasticity and adhesion between the concrete core and the metal casing were studied. As the optimal solution for the concrete core – a mixture of concrete modifier (CM) and metal fibers were selected, due to an increase in the adhesion between the concrete core and the metal casing. As a result, of experimental studies, graphs of load-deflection dependencies were built and presented. The research results proved that with an increase in the physical and mechanical properties of concrete together with the degree of its adhesion to steel, transverse deformations decrease. For further research development, numerical modeling might be created to describe and foresee the behavior of such elements with different parameters in more detail, which will lead to a better understanding of the combined operation of the tube and core.
Authors and Affiliations
Mikhail Izbash, Firaz Kazimagomedov, Yuriy Izbash
Keywords
Related Articles
- EP ID EP711751
- DOI 10.46299/j.isjea.20220105.07
- Views 61
- Downloads 0
Сalculation of chemical reaction temperatures of stepwise iron reduction from hematite with СО gas and gasification of solid carbon by degrees of chemical affinities of substances with oxygen
This article presents the results of a theoretical analysis that made it possible to evaluate the thermodynamic conditions for the flow of chemical reactions of the stepwise reduction of iron from hematite with a reducin...
Engineering patterns of changes in the parameters of functioning of intercity passenger transportation system
It is proved that when changing the parameters of the distribution of passenger traffic between automobile and railway route networks, the quantitative mean values of the average length of the route and medium network ra...
ВПЛИВ ПОВЕРХНЕВОГО СТОКУ НА ФОРМУВАННЯ ПАВОДКОВИХ ВОД
У роботі розглядається поверхневий стік як складова формування паводкових вод. Актуальність питання підтверджується наведеною статистикою виникнення паводкових вод. Окремо розглянуто природні фактори та антропогенні чинн...
ПРОГНОЗУВАННЯ СПОЖИВАННЯ ЕЛЕКТРИЧНОЇ ЕНЕРГІЇ ЕЛЕКТРОТЕХНІЧНИХ КОМПЛЕКСІВ МІСЬКОЇ ЕЛЕКТРИЧНОЇ МЕРЕЖІ
Завдання планування та прогнозування енергоспоживання є досить значущою в електроенергетиці. Підвищення точності прогнозування обсягів споживання електроенергії обумовлюється переходом до ринкових відносин між суб’єктами...
The influence of factors on the formation of information provision of real estate use at the regional level
The need and relevance of the formation of information support for the use of real estate at the regional level has been proven. The purpose of the study is to form real estate information support at the regional level....