Industrial Energy Monitoring System Using PLC and SCADA
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 1
Abstract
Proposed system monitors the energy consumption by the different sections of the plant during different time and during different process steps. This data gives us energy requirement of the plant with respect to various parameters. It enables to understand sudden changes in energy requirement with different aspects like at particular time, at particular section of the plant or during certain process. Using this data corrective/preventive maintenance or improvement can be done to particular section of the plant. The aim is achieved by using systems used in industry PLC and SCADA. PLC collects all information from the plant with different sensors and energy meters, Flow meters etc. Also it can gets data on communications from DCS of the plant. And finally all this data i.e. electric power consumption, steam flow, instrument air pressure etc. is compiled and represented in the SCADA in different format. This data plays vital role in understanding and managing energy requirement of the industry.
Authors and Affiliations
Pavan R. Gosavi, Prof. R. S. Khule
Keywords
Related Articles
- EP ID EP23046
- DOI -
- Views 283
- Downloads 4
Design of high speed low power Content Addressable Memory (CAM) using parity bit and gated power matchline sensing
Content Addressable Memory (CAM) offers high speed search function in single clock cycle. Due to its parallel matchline comparison, Content Addressable Memory power is hungry. In general CAM has three operation modes re...
Refitting Cellulose Fibers for Enhancing Value of Dense Bituminous Mixes Design
Ascend in infrastructure improvement in developing economies has brought about moving interest for bitumen over the most recent couple of years. Highway broadening and reconstructing existing resources are some key terr...
A Design of Dual Band Triangular Microstrip Patch Antenna for WLAN Applications
A triangular microstrip patch antenna is designed to improve the shortcomings of the previous antennas designed in rectangular, square and elliptical shapes such as high return loss and low gain. Dual band is achieved b...
The Effect of Hybridization on Mechanical Behavior of Natural / Glass Fiber Reinforced Composites
The degree of mechanical reinforcement can be obtained by the introduction of glass fiber in biofiber reinforced polyester resin composites. Addition of relatively small amount of glass fiber to the biofiber reinforced...
Microstructure and Mechanical Property Changes During TIG Welding of 31000-H2 (IS-737) Aluminium Alloy
Welding, as one of the most effective joining methods for metals, has been extensively applied in engineering usage since a long time. The determination of microstructure and mechanical properties of welded structures i...