Influence of Strain Rate and Temperature on the Visco-Plastic Properties of Commercially Pure Titanium and Ti6Al4V Titanium Alloy
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2015, Vol 6, Issue 2
Abstract
The paper presents results of tests concerning visco-plastic properties of commercially pure titanium and Ti6Al4V titanium alloy. The analyses were carried out at wide range of strain rates from 2 x 10[sup]-4[/sup] s[sup]-1[/sup] to 2 x 10[sup]3[/sup] s[sup]-1[/sup] using servo-hydraulic testing machine and Hopkinson bar at quasi-static and dynamic range of loadings, respectively. The influence of temperature on the compressive curves was determined within the range of temperatures from 23°C to 400°C applying Hopkinson bar equipped with temperature chamber. Taking into account obtained results, the coefficients of Johnson–Cook (JC) constitutive model were calibrated. Mechanical investigations were accompanied by microstructural analysis in order to determine influence of temperature and rate of deformation on the plastic deformation mechanisms.
Authors and Affiliations
Wojciech MOĆKO
Keywords
Related Articles
- EP ID EP63062
- DOI -
- Views 100
- Downloads 0
Metal Fe-Based Amorphous and Amorphous – Nanocrystalline Materials for Armours Construction
In the present paper, the physical and technical principles of process for production of bulk amorphous alloys are shown. Technical assumptions for construction of experimental unit for melting and casting of new alloys...
Badania spieku 77W-20Re-3Ni przeznaczonego na rdzenie pocisków przeciwpancernych
W artykule przedstawiono wyniki badań procesu wytwarzania i właściwości wolframowego spieku ciężkiego, przeznaczonego na rdzenie podkalibrowych pocisków przeciwpancernych. Badany materiał zawierał 77% wolframu, 20% renu...
Aerial Target Flight Path Modeling using B-Spline Curves
A method is presented for generating the flight path of an aerial target using B-spline curves developed for studying the combat effectiveness of anti-aircraft missiles and air defense systems. A procedure is described f...
Stability Analysis of the Control Gyrocamera Placed on Board of a Flying Object
In this paper was presented concept, a mathematical model of dynamic camera which is controlled and stabilized using a gyroscope and placed on board a flying object. The task of the camera is monitoring the land, identif...
Determination of the Firing Pin Critical Velocity and the Critical Power in the Percussive Initiation of Primer Caps
This work involved testing of the probability of initiating a KWM-3 type of primer cap as a function of the firing pin velocity upon impact. The tested firing pin was accelerated to the required velocity by a falling mas...