Influence of the microstructure of a diamond-containing composite material on the tool cutting ability when grinding a diamond single crystal
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2017, Vol 80, Issue 2
Abstract
Using the methods of electronic scanning microstructure and X-ray analysis, the influence of the structure of diamond-containing composite materials on the cutting ability of the tool for circular grinding of diamond single crystals has been studied. It is shown that the use of an oxide-hydroxide glass with a spreading temperature of 570–590 K as a precursor of the binder leads to the formation of melt films on the surface of silicon carbide and diamond particles at 600–630 K and the glass content in the batch is 10 vol. %. The conversion of oxide-hydroxide glass films to oxide films proceeds at 700–775 K during the sintering of the composite material. Depending on the volume content of the glass in the charge, the porosity of the compact, three types of structure of composite materials are distinguished: a volumetric skeleton of glass-clad diamond particles and silicon carbide with pores at the sites of multiple compounds; a frame made of glass-clad diamond particles and silicon carbide with glass pores in places of multiple connections; a matrix of glass and the particles of diamond, silicon carbide and pores located in it. The maximum cutting ability of the tool for circular grinding of diamond is provided by a composite material with a structure of the first type.
Authors and Affiliations
A. M. Kuzei, V. Ye. Babich
Keywords
Related Articles
- EP ID EP255683
- DOI -
- Views 113
- Downloads 0
Computational analysis of the temperature improvement of electric asynchronal motors
In the development of electric machines as a whole, as well as asynchronous motors, in particular, the limit values of temperature are the key factors that affect the efficiency of the overall design. Since the usual loa...
The investigation of thermal diffusivity for myocardium in conditions of bypass circulation
The method for determining the thermal diffusivity of the myocardium in the process of hypothermia and cardiac hyperthermia is based on noninvasive temperature control, which makes it possible to determine in each part o...
The influence of moisture on the colour characteristics of natural stone
The objects of the research are the facing elements of buildings and architectural monuments. The subject of the study is the process of changing the colour of the decorative stone from moisture. To solve the problems of...
Investigation of the durability of the welded teeth of shale piles by means of experiment planning
The article examines wear resistance increasing means for roll-cone drill bit teeth. There were proposed the methods of teeth working surface reinforcing by cast tungsten carbide with nickel plaque and a mixture of titan...
Methods of control the machining process
Presents control methods, differentiated by the time of receipt of information used: a priori, a posteriori and current. When used a priori information to determine the mode of cutting is carried out by simulation the pr...