Influence Simulation Analysis of New Road Pile-plate Structure Construction on Deformation of Adjacent Metro Tunnels and High-speed Railway Bridges
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 10
Abstract
Objective The construction of road pile-plate structures can significantly impact adjacent metro tunnels and railway structures. Under stringent regulatory requirements and complex engineering conditions, it is essential to ensure the safety of existing metro and railway structures. Method Based on the new Bai′an Highway project, numerical simulation methods are utilized to construct a Plaxis3D finite element calculation model. This model simulates various construction conditions to analyze the impact of pile-plate structure construction process on the adjacent existing metro and high-speed railway. Result & Conclusion The research results indicate that during the construction of bored cast-in-place piles in this road project, adverse conditions such as hole collapse and soil plug effect are likely to occur. These conditions can negatively impact adjacent metro lines, causing metro tunnel displacement and convergence deformation to exceed control values. In contrast, the construction process has less impact on high-speed railway bridges, with deformation remaining within controllable limits. Therefore, it is necessary to improve and optimize the road construction plan, such as increasing the distance between pile foundation and metro tunnels and extending the length of some piles. A safety assessment of the optimized design scheme is conducted, and subsequent numerical simulation results show that the metro tunnel displacement and deformation caused by road construction can meet the required standards, ensuring metro tunnel structural safety.
Authors and Affiliations
Jiangtao LIU, Mingjie GONG, Xiang YUAN, Zihan LIN
Keywords
Related Articles
- EP ID EP749212
- DOI 10.16037/j.1007-869x.2024.10.009
- Views 88
- Downloads 0
Identification Method for Missing Cotter Pins in Catenary Systems Based on Stacked Denoising Autoencoder Network
Objective When using convolutional neural networks (CNNs) for the state detection of catenary system cotter pins, the imbalance between positive and negative samples leads to a low detection rate of missing pins in the n...
Key Technologies and Application of Electro-hydraulic Sleeper Internal Locking Turnout Switch Machine
Objective Current commonly used EhsD (electro-hydraulic sleeper external locking turnout switch device) exhibits problems such as complex mechanical structure, high civil engineering requirements, numerous faults, and su...
Optimization of OCC and BOCC Architecture Design for Urban Rail Transit
Objective Under the existing modes, when a core equipment in the OCC (operation control center) fails, the BOCC (backup operation control center) needs to be activated, which greatly increases the dispatchers′ difficulty...
Cause Analysis and Control Measures for Inaccurate ATO Parking Accuracy of Qingdao Metro Line 13
Objective In order to solve the stop mark exceeding/failing problem of Qingdao Metro Line 13, it is necessary to deeply analyze the control principle of ATO (automatic train operation) parking and the factors affecting i...
Analysis of Electromagnetic Interference Problems in AC Traction Power Supply System of Guangzhou Metro Line 22
[Objective] During the normal operation of metro lines, due to incomplete rail-ground insulation, metro that adopts AC (alternating current) traction power supply system can cause electromagnetic interference on adjacent...