Innovative technology for fabrication of antiwear layers for forging tools
Journal Title: Tribologia - Year 2011, Vol 239, Issue 5
Abstract
Cold forging tools are known to be exposed to extremely high loads due to the high forming stresses and the strain hardening of the workpiece material. This paper deals with the study of the influence of laser texturing of hard-coated tool surfaces and micro-channels filled with solid lubricants on tool tribological behaviour in cold forging processes. The results of a study of the combination of hard coating with and solid lubricant layers for forging tools show the beneficial effect of nano- and micro-particle solid lubrication in the case of the storage of nanoparticles in the micro-reservoirs at the sliding interface. The use of nanolayered coatings (like nACVIc) seems to be more effective for areas of high contact stresses than a combination of coatings. The use of microchannels filled with MoS2 nanoparticles seems to be more effective for areas of abrasive wear.
Authors and Affiliations
Hanna Wiśniewska-Weinert, Volf Leshchynsky, Mikhail Ignatev, Jacek Borowski, Tomasz Wiśniewski
Keywords
Related Articles
- EP ID EP271025
- DOI -
- Views 53
- Downloads 0
TESTING THE EFFECTIVENESS OF ANTISCUFFING FLUIDS USED DURING THE TRANSPORT OF BOTTLES ON CONVEYORS
During transport on conveyor, glass bottle surfaces are damaged on their surface of contact. Wear traces in the form of rings arise. Counteracting this process involves, in particular, the use of antiscuffing fluids. The...
FRETTING WEAR IN THE ROTATIONAL JOINT
This article will attempt to explain the development of fretting wear of an axle-sleeve rotational joint. The conditions for the development of wear are surface pressure and very small amplitude oscillations. The article...
THE EFFECT OF MATERIAL AND TECHNOLOGY OF SURFACE LAYER PREPARATION OF ROLLING ELEMENTS ON PITTING
In the paper, the results of the effect of material type and vacuum techniques of the surface layer on fatigue wear of heavy-loaded rolling contact are presented. Various materials, 100Cr6 bearing steel, 16MnCr5 carbonis...
ADHESION INFLUENCES ON THE PRESSURE AND CARRYING CAPACITY OF CYLINDRICAL MICROBEARINGS
This paper presents a new numerical method of hydrodynamic pressure determination in micro-bearing lubrication. We are considering the microbearing where the attained journal diameter values are about 1 millimetre and th...
WYZWANIA I METODY W ANALIZACH PRZEPŁYWU CIEPŁA W BEZSMAROWYCH ŁOŻYSKACH POLIMEROWYCH
Generacja ciepła i jego rozprowadzenie stanowi ważny element przy projektowaniu i użytkowaniu suchych łożysk polimerowych, ponieważ wysoka temperatura może prowadzić do szybszego zużycia materiału i uszkodzenia łożyska....